海洋工程英语my介绍.docVIP

abrasive paper 砂纸 AC generator 交流发电机 AC motor 交流发动机 access hole(for welding) =cope hole （焊接）工艺孔 accommodation and power platform(APP) 生活动力平台 acetylene gas 乙炔 acid electrode 酸性焊条 acid proof cement 防酸水泥 additive 添加剂 aft winch 船艉绞车 agitator 搅拌器 air blower 鼓风机 air compressor 空压机 air driven pump 气动泵 air hoister 气动绞车 air manifold 气包 aluminum sheet 铝皮 anode life 阳极寿命 anode stand-off post 支架式阳极的立柱 anodic resistance 阳极电阻 anticorrosive paint 防锈漆 anti-electrostatic floor 防静电地板 API specified requirements API规定的要求 applicable API specification API适用范围 arc cutting 电弧切割 argon arc welding 氩弧焊 argon arc welding machine 氩弧焊机 as-built dossier 完工资料 as-built drawing 完工图 assemble 组装(动词) associated gas 伴生气 at the option of A 按A的意愿 Atmospheric diving system =unpressurized diving system 常压潜水系统 atmospheric vent 放空管 attachments 附件 automatic spraying system 自动喷淋系统 back chipping 清根 back gouging 反面气刨 backing weld 打底焊道 backwash return pump 反冲洗回流泵 backwash surge tank 反冲洗罐 backwash tank 反冲洗水罐 Ball hardness 布式硬度 basic design 基本设计 basic drawing 基本设计图 beam depth 梁高 beam path distance 超声波发射程距 bearing strength of the ground 地基承载力 bearing stress 支撑应力 before welding is initiated 始焊前 bilge / fire pump 舱底污水-消防两用泵 bilge alarm system污水报警系统 blast cleaning喷砂除锈 blind flange 盲法兰 blind spectacle flange 快速盲法兰 blow count 打桩的锤击数 blow out preventer system(BOP system) 防喷器系统 blowdown vessel 排放罐 blowhole;gas pore 气空 blowout preventer stack 防喷器组 boat landing 登船平台 bolt,nut and washer 螺栓、螺母及垫片 bolted connection 螺栓连接 boom 吊机扒杆 boom angle 吊臂倾斜角 bore hole 镗孔 branch member 支杆 breathing apparatus , respirator 防毒面具 bridge 栈桥 bridge (overhead) crane 天车吊 burner 气焊工 burr and flashing 飞边毛刺 butterfly valve 蝶阀 butt-welded seam 对接焊缝 cable layer 敷缆船 cable rack / tray 电缆托架 caisson 沉箱 caisson washing pump 洗船泵 caisson-type platform 沉箱式平台 can （管件的）段 cantilever beam 悬臂梁 cantilever jack-up rig 悬臂自升式钻井船 cantilever well module 悬臂式井口模块 cap beam 帽梁 capped steel 半镇