盒形件的成形工艺 冲压毕业设计论文.docVIP

摘 要 盒形件被广泛应用于生产中。小到微型马达外壳，大到汽车覆盖件，盒形件在各领域起到不同的作用，如防护、防磁漏、固定等。盒形件是非旋转体零件，其几何形状是由4个圆角和4条直边组成。拉深变形时，圆角部分相当于圆筒形件拉深，而直边部分相当于弯曲变形。与旋转体零件的拉深相比，其拉深变形要复杂些。借助ANSYS/LS-DYNA非线性有限元分析软件，对制板料成形性能仿真，大幅度的减少设计和实验的量，降低成本费用，提高材料的成形质量。从而探讨盒形件的成形工艺目前人们对于盒形件拉深的变形特点有助于指导生产、ABSTRACT The box-shaped pieces are widely used in production. To the micro-motor casing, large car cover, box shaped part plays a different role in various fields, such as protection, anti-magnetic leakage, fixed. The box-shaped non-rotating body parts, and its geometry is represented by four rounded corners and four straight edge. Deformation of