整体式叶轮的三维设计与加工资料.docxVIP

PAGE \* MERGEFORMAT31 PAGE \* MERGEFORMAT1 毕业设计论文 设计（论文）题目：整体式叶轮的三维设计和制造 题目下达日期 开 始 日 期 完 成 日 期 指 导 教 师 专 业 班 级 学 生 姓 名 教研室主任： ： ： ： ： ： ： ：2014 年 4 月 20 日2014 年 4 月 20 日2014 年 10 月 15 日杨 延 波机电一体化机电1206李 文 杰孙 荣 创 数控工程学院 整体式叶轮的三维设计和制造 摘 要 随着科学技术的发展,航空发动机的性能要求越来越高,作为航空发动机的关键部件,整体式叶轮被设计出的形状也是越来越复杂,这给数控编程带来了极大的困难,高质量高效率的加工出整体叶轮是当今研究的一个重点课题。本文主要针对四轴加工机床上对整体式叶轮的加工。并在加工之前借助了CAD/CAM软件和数控仿真软件如： Pro/E 、 CAXA制造工程师和VERICUT对整体式叶轮进行了实体造型、自动编程以及数控加工仿真。该过程建立了仿照实际加工环境下的刀具干涉与碰撞情况。仿真校验时，建立零件毛坯、夹具和刀具的三维数字化模型，并设置少量的加工工艺参数，即可完整演示数控加工过程。该方法与传统加工中采用试切法校验NC程序相比，更具可靠性。在零件加工之前，调整和修改刀具的干涉及机床的碰撞，可极大地提高多轴NC程序的校验效率，缩短复杂零件的制造周期。 关键词：整体式叶轮，多轴数控加工，Pro/E，CAXA制造工程师，VERICUT THREE DIMENSIONAL DESIGN AND MANUFACTURING OF THE INTEGRAL IMPELLER摘 要 ABSTRACT With the development of science and technology, the requirements of aero engine performance is getting higher and higher, as a key component of aero engine, the integral impeller was designed shape is more complex, which brings great difficulties to the numerical control programming, high quality and high efficiency machining integral impeller is a key research topic today. This article mainly aims at the four axis machining tool for integral impeller processing. And with the help of CAD/CAM software and CNC simulation software such as Pro/E, before processing: CAXA manufacturing engineer and VERICUT modeling, automatic programming and Simulation of NC machining of integral impeller. The process is established according to the actual processing environment tool interference and collision. Simulation, 3D digital model building part blank, fixture and tooling, and set the processing parameters in small quantities, can be a complete presentation of NC machining process. The method and the traditional processing by trial cutting method for checking NC program compared with more reliability. In parts processing before the collision and interference and machine adjustment and modification tools, can gre