新工人入场安全培训教案.pptVIP

　一工人在工地不慎跌倒后,一翘起的长32厘米、直径2厘米的钢筋由下颌直穿进口底到鼻根部，颈动脉三角区被穿透。 脏乱的环境极容易引起绊倒。。。或堵塞你的逃生通道 现场文明施工 * 祝大家工作愉快！ 谢谢！ Refer to procedure: PR8560-0000-1302.The procedure describes the proper actions personnel should take in an emergency situation and to provide direction on how and when to appropriately activate notification and emergency procedures. The actions, when followed, will minimize personnel injuries and exposure to potentially dangerous situations and minimize property damage. .An emergency may result from an industrial accident, gas fire, explosion, personal injury, toxic release, or chemical spill. Key Points: Medical Service Medical kit Emergency contact Number Report accident properly To use electrical equipment and tools, normally there are three hazards: Electric shock, Fire and Explosion. Improper use the electric tools is one of the major cause to result in accident and get persons injuries, death and damage to the property. Key Points: Tools inspection Comply with Notice and specification Protect cables from knots, kinks. Disconnect power when not in use Store tools carefully Repair and maintain properly. Hot Work is including welding, cutting, grinding. The potential hazards associated are: Cause fire, electric shock, burn, etc.Also the welding fume is quite harmful for the health and the welding arc is quite harmful for the eyes. Key Points: Permit to work Welding machine, cable cords inspection Fire extinguisher and fire blanket Fire watch Arc shield Proper PPE Housekeeping Hot Work is including welding, cutting, grinding. The potential hazards associated are: Cause fire, electric shock, burn, etc.Also if the gauge, regulator assembly, flash back arrestor are broken or other damage , it may cause fire or explosion. Key Points: Permit to work Welding machine, cable cords inspection Fire extinguisher and fire blanket Fire watch Flash back arrestor Gauge and regulation assembly Proper P