机械毕业设计（论文）-钢卷翻转运输机设计（全套图纸）.doc

本科毕业设计(论文) 题目： 院 （系）： 专 业： 班 级： 学 生：学 号： 指导教师： 2011年 月  全套图纸，加153893706 Abstract In the area of mines production of metallurgical machinery, the transport vehicle is widely used. And there are many types of Transporter. Those can be divided into transportation volume car, roll change car, etc. according to its different uses car. And can be divided into Motor Drive, Hydraulic jack drive according to its drive source. The whole function of Coil Transfer Car is for transporting . This design of the Coil Transfer Car is driven by the motor and is made up of the the main frame by the coil assembly, coil cars running bodies, jacking device, assembly of hydraulic and electrical control system. Coil car is is a non-standard mechanical device, this design of the Coil Transfer Car uses a machine and electro-hydraulic operation control system . And its design and technical properties is unique . It has a reasonable overall arrangement,and good interchangeability and stability . It is a very good instance for our major . During the whole design process, i used the knowledge of mechanical drawing, CAD drawing, mechanical design, mechanical principles of hydraulic technology, computer technology and so on .During this process, I get a better understanding of related knowledge . Keywords: transport vehicle 、hydraulic jacking device 、Lifting device  目录 摘要 1 Abstract 2 目录 2 1 概述 1 2 该设计中整体的方案及工作原理 1 3 机械系统的设计 3 3.1 钢卷翻转机车架总成结构设计 3 3.1.1 钢卷翻转机总体结构: 3 3.1.2 传动装置的结构: 3 3.1.3 钢卷翻转机车轮组安装结构 3 3.2 钢卷翻转机行走机构的设计 4 3.2.1参考数据 4 3.3 选择电动机 4 3.3.1 类型的选择 4 3.3.2功率的确定 5 3.3.3工作机的阻力 5 3.3.4电动机的转速的确定 6 3.4计算传动装置的运动参数和动力参数 6 3.4.1 计算总传动比i 6 3.4.2各轴的转速 6 3.4.3 各轴的功率 6 3.4.4各轴的转距 7 3.4.5链轮、链条的选取校核 7 3.4.6 轴承的选取校核 8 3.5轴的设计与校核 9 3.5.1轴的设计 9 3.4.2 轴的强度校核 9 4液压总成的设计 13 4.1.工况要求 13 4.2动力和运动参数 13 4.2.1顶升截荇 13 4.2.2 速度 13 4.2.3 工作行程 14 4.3工况分析 14 4.3.1顶升油缸分析 14 4.3.2计算液压缸尺寸及工况 14 4.4液压缸主要尺寸确定 16 4.4.1顶升油缸壁厚及外径计算 16 4.4.2工作行程确定 17 4.4.3缸盖厚度得确定 17 4.4.4最小导向长度得确定 18 4.4.5缸体长度得确定 19 4