近似模型法磨床零件结构研究.pptVIP

Grinder parts structure design based on approximation model research Electrodeposition mechanism of ?nickel-based composite coating Grinder parts structure design based on approximation model research Electrodeposition mechanism of ?nickel-based composite coating Grinder parts structure design based on approximation model research Tutor ： Reportor 3 Late work and learning task 4 Introduction 1 2 structure of thesis Approximation model methods Structure optimization design of grinding wheel spindle Introduction The high speed of grinding wheel caused by vibration will lead to the deterioration of the processing quality. The purpose of structure optimization design is to obtain a good static and dynamic performance and structure of the minimum weight of the machine tool parts structure design scheme. The basic idea of approximation model methods is that through mathematical statistics and experimental design method to establish an explicit function relationship between design variable and the response values. Approximation model methods These sample points and the response value contains abundant system information and gradient information, through interpolation method, approximate explicit function of response values can be constructed. Structure layout Selection of design variables Determine the performance design goals and constraints Structure analysis (the finite element method) to get the response value Design of experiment method to obtain sample points ? Set up approximate model Make a sample Design process based on the approximate model of high speed grinding machine structure optimization. Matters needing attention 1. The approximation mode exist error , conduct ing inspection before optimization is necessary. Using RSME. 2. Selection of sample points is very important. Fig.1 Commonly used experimental design method Structure optimization design of grinding wheel spindle Fig.2 Finite element modeling Fig.3 The grinding force in the