螺栓必备摘要.ppt

* * Tightning torque in general! Quality variation of joint members: - Friction from surface treatment, lubrication, material changes, dimension variation. - Dimensions. Specified bolt quality Production errors in threads (intended extension of tool life beyond acceptable limits) Production errors giving paint, dirt, chips etc in threads. Question: Which factor influences the clamp load the most (after torque)? * 扭矩 OK, 角度过低 扭矩 角度 扭矩 = OK 角度 = 过低 扭矩 = OK 角度 = OK * 扭矩 OK, 角度过高 扭矩 = OK 角度 = 过高 扭矩 = OK 角度 = 过低 扭矩 = OK 角度 = OK 扭矩 角度 * 结论： Clamp force Friction in threads Friction under nut or