武科大流体力学流体力学教案.docVIP

教案纸 1 FLUID PROPERTIES（4学时） 【主要讲授内容及时间分配】 1.1 DEFINITION OF A FLUID（25分钟） 1.2 FORCE, MASS, LENGTH, AND TIME UNITS（20分钟） 1.3 VISCOSITY（15分钟） 1.4 CONTINUUM（30分钟） 1.5 DENSITY, SPECIFIC VOLUME, SPECIFIC WEIGHT, SPECIFIC GRAVITY, PRESSURE（90分钟） 1.7 BULK MODULUS OF ELASTICITY 1.8 VAPOR PRESSURE 【重点与难点】 1、重点： Definition of fluid; Newton’s law of viscosity; Ideal fluid; International System of Units; The reason of fluid viscosity; Absolute and kinematic viscosity; Bulk modulus of elasticity; Cavitation. 2、难点： Newton’s law of viscosity; Absolute and kinematic viscosity; Bulk modulus of elasticity. 【教学要求】 1、Master definition of fluid; 2、Master Newton’s law of viscosity; 3、Master Ideal fluid; 4、Master International System of Units; 5、Master the reason of fluid viscosity, absolute and kinematic viscosity; 6、Master bulk modulus of elasticity; 7、Master cavitation. 【实施方法】 课堂讲授，PPT配合 教案纸 2 FLUID STATICS（4学时） 【主要讲授内容及时间分配】 2.1 PRESSURE AT A POINT（25分钟） 2.2 BASIC EQUATION OF FLUID STATICS（20分钟） 2.3 UNITS AND SCALES OF PRESSURE MEASUREMENT（15分钟） 2.4 MANOMETERS（30分钟） 2.5 FORCES ON PLANE AREAS（90分钟）Pressure at a point; Basic equation of fluid statics; Gage pressure, absolute pressure and negative suction vacuum; Pressure measurement; Manometers; Forces on plane areas, center of pressure, tensile stress in a pipe and spherical shell. 2、难点： Basic equation of fluid statics; Gage pressure, absolute pressure and negative suction vacuum; Force center of pressure, tensile stress in a pipe and spherical shell. 【教学要求】 1、Master all direction of pressure at a point is equal; 2、Master basic equation of fluid statics; 3、Master gage pressure, absolute pressure and negative suction vacuum; 4、Master forces on horizontal surfaces; 5、Master center of pressure forces on inclined surfaces; 6、Master tensile stress in a pipe and spherical shell. 【实施方法】 课堂讲授，PPT配合 教案纸 FLUID-FLOW CONCEPTS AND BASIC EQUATIONS （8学时） 【主要讲授内容及时间分配】 3.1 Flow Characteristics （） 3.2 The Concepts（） 3.3 Reynold