EHS-018危险作业审批管理制度.docxVIP

危险作业审批管理制度文件编号: EHS-018 版本号: 1 生效日期： 页码:  PAGE \* Arabic \* MERGEFORMAT 5/4 1 目的( Purpose ) 为加强公司危险作业的安全管理工作，防止危险作业因未审批、未对作业现场检查、未采取相应有效防护而发生安全事故。 In order to strengthen the safety management of dangerous operations company, prevent the dangerous operations without approval, without inspection at the work site, have safety accidents because of not taking corresponding effective protection. 2 适用范围(Scope) 此份文件应用于以下部门/区域：This document is applied to the following departments/areas: 办公室office 制造部manufacturing department 研发部Research and Development Department 设备部Equipment Department 项目部Project Department 物流部Logistics Department 其他 others 3. 依据(According) EHS-005《环境健康安全控制程序》 EHS - 005 environmental health and safety control procedures 4 用语定义(Definitions) “高空作业”是指：在离地面2米以上的地点进行工作时，一般称为“高空作业”；在高空有固定操作室或作业平台的除外。 Aerial work refers to when you work above the ground work of more than 2 meters, generally called aerial work; expect for those having fixed cab or the work platform at high altitude. 5 职责权限(Responsibilities) 5.1设备部EHS工程师负责对危险作业人员作业前进行必要的培训，同时对危险作业进行评估，提出建议，同时根据需要提供必要的防护用品。 Equipment EHS engineer is responsible for training for those dangerous operations personnel before work and evaluate the dangerous operations, and put forward the proposal, at the same time provide the necessary protective equipments according to the needs. 5.2相关作业部门在作业前主动向设备部提出申请，在获批后方可进行作业，作业过程中不得违反相关制度和作业指导书的要求。 Relevant work departments will actively apply to the equipment before operation, after the approval to operate, you shall not violate the regulations in the process of operation and requirements of the work instructors. 5.3 作业部门对本部门的危险作业进行监督，检查，并配合设备部EHS工程师提出的整改要求积极整改后才可继续作业。 Operation department will supervise and inspect to the dangerous operations of the department and comply with all equipment EHS engineer to request the rectification of positive improvement after continuing to work. 6 文件内容(Procedure) 6.1危险作业范围Scope of dangerous operations 6.1.1 危险区域动火