标准配置指导.docVIP

IUB（4E1）： ADD IMAGRP: SRN=0, SN=14, BT=AOU, IMAGRPN=0, IMAID=0, FLOWCTRLSWITCH=ON; ADD IMALNK: SRN=0, SN=14, IMAGRPN=0, IMALNKN=0; ADD IMALNK: SRN=0, SN=14, IMAGRPN=0, IMALNKN=1; ADD IMALNK: SRN=0, SN=14, IMAGRPN=0, IMALNKN=2; ADD IMALNK: SRN=0, SN=14, IMAGRPN=0, IMALNKN=3; //以上命令中，框号SRN、槽号SN填写承载的接口板的框号槽号，IMA组号IMAGRPN、IMA标识IMAID与网络设计工具生成的NODEB ID一致。 ADD SAALLNK: SRN=0, SN=0, SSN=1, SAALLNKN=0, CARRYT=IMA, CARRYSRN=1, CARRYSN=14, CARRYIMAGRPN=0, CARRYVPI=1, CARRYVCI=40, TXTRFX=100, RXTRFX=100, SAALLNKT=UNI; ADD SAALLNK: SRN=0, SN=0, SSN=1, SAALLNKN=1, CARRYT=IMA, CARRYSRN=1, CARRYSN=14, CARRYIM