环氧耐油导静电防腐涂料的使用.docVIP

Intended Uses 用途 用于装载原油、汽油、煤油、柴油、石脑油以及苯类溶剂的舱室贮槽内壁，作导静电防腐蚀 涂层，也可用于需要导静电的场合，具有优良的附着力、柔韧性、抗冲击性、良好的耐油、耐腐蚀性以及良好的导静电性能。 Suited for interior surface od tank loading crude oil, gasoline. Kerosene, gas oil naphtha and benzene-based solvent as anti-corrosive and antistatic coating. Also be used in the site required resistance to static. It forms a coating with excellent with excellent adhesion flexibility, impact resistance, good oil and corrosive resistance as well as good antistatic property. Product Information产品简介 HYGT393-1：黑色，采用碳系导电介质 HYGT393-2：灰色，采用金属氧化物复合导电介质 HYGT393-1：Black Using conductive carbon black or grapgite powder as conductive madium HYGT393-2:：Light grey, Using metalic oxide modified micapowder as conductive medium Application details 产品数据 Volume Solids 固体份 ≥50%ccording 50% Dry Flm Thickness干膜厚度 100 microns equivalentto200 microns of wet film 100微米相当于200微米湿膜厚 Theoretical Coverage 理论涂布率 3.85 m2 /Kg 3.85平方米/公斤 Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Mix Radio 混合比 A : B=5:1(by weight ) 甲:乙=5:1(重量比) Method of Application 施工方法 Airless Spray 无空气喷涂 Recommended 推荐采用 Brush or Roller 涂刷或辊涂 Recommended 推荐采用 Conwentional Spray 传统喷涂 Not Recommended 不推荐采用 Thinner 稀释剂 C003 Maximum thining:less than 5% 最大稀释量：＜5% Cleaner 油漆设备清洗剂 C003 Pot Life 使用期 25℃:4-6h Storage 贮存期 One year 一年 Drying time 干燥时间 Substrate Temperature底材温度 Touch Dry 表干 （h） Hard Dry 硬干 (h） Over coating Interval 覆涂间隔 Mix最短 Max最长 25℃ 1 24 24hours 小时 above 10℃ 5days above 10℃ Storageand Handling 贮存与管理 Storage 贮存 Store in cool and dry conditions 贮存于阴凉干燥处 Pack size 包装规格 A;20Kg in 20 liter container 甲:50公斤装于20公升容器中 B:4Kg