中卡驾驶室涂装线英语.doc

第四章 工程内容及技术规格 Chapter Four Engineering Content And Technical Specification  第一部分 总体要求  目 录 1 承包内容方式及交货时间 投标方供货范围 Scope of bidder’s supply 2.1 涂装线设备及辅助设施 .1 Painting production line equipment and auxiliary facility 2.2 机械化传输系统 .2 Mechanized conveyor system 2.3 电气控制系统 .3 Electrical control system 3 对投标方提供资料的要求 Bidder’s requirement on data submission 4 项目组织和实施进度 Project organization and implementation program 5 设备制造、安装要求 6Requirements on equipment manufacture and installation 6 调试、验收Commissioning, trial production, formal production, acceptance and production accompanying 7 培训和售后服务 Training and after-sale services 8 招标方可提供的条件 Conditions to be provided by the Tenderer  承包内容方式及交货时间 1.1 驾驶室涂装线根据整条线内具有独立功能的工艺区段将生产线分为1个子系统，即： 1.1 and sections, i.e.: 1）前处理系统及其电气控制系统1）2）电泳系统及其电气控制系统2）烘干室及强冷室系统及其电气控制系统(包括电泳烘干室及强冷室、胶烘干室及强冷室、中涂烘干室及强冷室、面漆烘干室及强冷室)4）封闭工作间其电气控制系统（封闭工位包括车底喷涂室、电泳打磨室、电泳离线打磨室、中涂打磨室、中涂离线打磨室、点修补室、大返修准备室、喷蜡室）repair booth, spot repair booth, overhaul preparation booth, and wax spray booth); 5）敞开工位及其电气控制系统敞开工位包括涂密封胶工位、奥迪特工位、电泳修整工位、检查工位、换件工位、手工予清理工位、检查抛光修饰工位）pen working stations and their electrical control system (Open working stations shall include the sealant applying station, Audit working station, electrocoat repair working station, inspection station, work piece replacing station, manual pre-cleaning station and inspection / polishing / finishing station. ) 6）喷漆室及其电气控制系统（包括中涂喷漆室、））pray booth and its electrical control system (including primer spray booth, and top-coat spray booth); 7）自动喷涂装置及其电气控制系统（自动喷涂设备包括：车身底板机器人喷胶系统、自动喷涂装置、离子化自动除尘机））Automatic painting spray device and its electrical control system (including underbody robot sealant spray system, automatic painting spray device, and automatic ionized dust remover); 8）输调漆、供胶及供蜡系统及其电气控制系统）Paint mixing / feeding system, sealant / wax supply system and their electric control devices; 9）设备空调系统及其电气控制系统厂房通风换气系统及其电气控制系统electrical control system 11）装备灭火系统及其电气控制系统） fire extinguishing system