模拟路灯控制系统的设计论文毕业论文.doc

摘 要 随着科技发展和人民生活水平的提高，大家对公路的重视度越来越高。每年发生的交通事故都很多，所以减少交通事故发生是我们现在重点讨论的问题。在公路上路灯起了照明作用，大大减少了因为视野视线问题发生的问题，可是一些很少车辆经过的路段就会浪费了一些资源，所以模拟路灯控制系统就是为了研究节能与安全的话题，它既可以在无车辆经过时节省资源，另一方面又可以在来车辆时候提供照明作用。是一个非常实用的课题。 本文首先介绍了一种新型的控制系统，基于ZigBee技术的路灯智能控制系统，分析了它的技术特点及其应用，并分析了本设计设计的ZigBee技术路灯控制系统可以实现的功能。 其次根据设计要求，先画出了设计系统的总体框图，它的总体框图包括：PC监控系统、网路协调器、ZigBee终端节点、微波检测电路、光强检测电路、路灯直接控制电路。其次根据总体框图分别设计了各个部分的硬件。 然后对设计的系统进行了软件部分的设计，设计的程序包括：系统流程图路灯检测流程图、模拟路灯控制系统液晶显示程序、实时监测流程图、人工控制模式、时钟电路流程图、按键流程图、按键扫描流程图。 最后根据设计的系统，运用PROTUES软件对系统进行了仿真调试，仿真的结果显示系统的设计满足设计要求。 关键词：Zigbee技术；LED路灯；设计 ABSTRACT With the development of science and technology and the improvement of peoples living standard, people pay more and more attention to the road. There are a lot of traffic accidents every year, so it is our focus to reduce the traffic accident. In highway road lamp lighting, greatly reducing the problem because of the horizon line of sight problem, but some very few vehicles through the road will waste resources, so the simulation street lamp control system is in order to study energy saving and safety topics, it can in the vehicle after the season, resources, on the other hand can provide lighting effect in the vehicle when. Is a very practical subject. This paper introduces the application of a simulated street lamp control system, using the technology of the single chip microcomputer, which is used to realize the intelligent control of the analog street lamp. The control system has set the timing function of street lamp, also can be independently controlled street lamp turn-on and turn off; can also have a dimming function, on the road of light adjusted can also be in accordance with the requirements as set out in the street driving power output in the range of 20% - 100% adjusting. During the day mode, but also according to changes in the environment of light and shade to control the opening and closing of street lights, in the case of the night mode, according to the traffic road conditions automa