空调通风毕业设计最终版要点.docxVIP

重庆大学本科学生毕业设计  PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT79 本科毕业论文 上海某办公楼通风系统设计 HVAC DESIGN OF A PUBLIC BUILDING IN SHANG HAI 学院(部)： 专业班级： 学生姓名： 指导老师： 2014年5月26日 上海某办公楼通风系统设计 摘 要 本设计为某公共建筑通风空调系统设计。该建筑位于上海市，地上2层。空调面积约为6289.43m2，夏季设计冷负荷约919kW，冬季设计热负荷约720kW。本任务的设计内容主要包括：根据建筑功能和室内环境的控制要求,对各房间进行空调设计；冷热源设计；公共卫生间、设备房的通风设计和系统消声隔振、管道保温设计等。初步设计中，根据各房间的不同功能选择概算指标进行概算,计算出全楼负荷,并依照当地各种设计参数和设计标准,从初投资和年运行费角度对四种方案进行技术经济比较,确定最优冷热源方案为VRV空调系统。设计中, 遵循暖通空调设计规范,对建筑各房间进行了详细的负荷计算，对空调风系统进行了详细的水力计算，并进行了设备选型。根据计算结果,参照暖通空调制图规范,绘制了详细的空调通风工程施工图。 关键词：VRV空调，负荷计算，方案比较，水力计算 SHANGHAI OFFICE BUILDING VENTILATION SYSTEM DESIGN ABSTRACT This project is a heating ventilation and air-conditioning (HVAC) system design for a public building.The building is located in the city of Shanghai, 33 levels on the ground. Air conditioning area is about 6289.43 m2, The summer design cooling load is about 919 kw, while the winter design heat load is about 720 kw. The task of this design content mainly includes: according to the requirements of the building function and indoor environment control, air conditioning design for each room; Cold and heat source design; The ventilation design of public toilet, equipment room and acoustical isolation, pipe insulation system design. In preliminary design, according to the different function of each room select estimate index to estimate, calculate the QuanLou load, and in accordance with the local various design parameters and design standards, from the perspective of initial investment and annual running cost to compare technical economy of four kinds of solutions, to determine the optimal heat and cold source schemes for VRV aircon system. Design, adhere to the hvac design code, the construction load calculation in detail, each room of air conditioning wind system hydraulic calculation in detail, and the equipment selection. According to the calculation results, with reference to the hvac drawing specification, ventilating and air conditioning engineering drawi