200T挤出机液压缸系统机械CAD图纸设计.doc

摘 要 液压缸是实现液压能转变成机械能的装置，它是用来做摆动运动（或直线往复运动）的执行元件，拥有比较简单的结构并且工作可靠，完成摆动运动时，无传动间隙且可以避免减速装置的影响，使其平稳运动，现今在各机械的液压领域，都得到了广泛的实践应用。 液力与液压传动的工作介质都是液体，用此方式来进行能量的传递，液力传动是将机械能转变成液体动能，再将液体动能转变为机械能的装置，可以把能量进行传递，也是液体传递的一种分支，它的组成主要是几个叶轮的非刚性连接。而液压传动不同，它的传递方式是通过工作介质来进行控制与传递能量，它们均为流体传动，目前在各个领域已得到广泛认可和采用。 本次设计主要是对液压缸系统的设计方法来进行系统的研究，通过对液压缸建立CAD原型得出了以下研究成果：1.在分析液压缸的基本工作原理上，总结它的主要安装以及工作形式。2.做出其装配图，通过了解装配图的特征，来建立模型。3.结合液压缸的装配CAD系统模型，来开发其系统CAD软件原型系统。4.通过计算的方法来选择需要的液压元件。5.最终对所设计的系统进行检验。6.绘制最终正式的系统图与文件。 关键词：液压缸；液压传动；液力传动Abstract Hydraulic cylinder is a simple and reliable device that performs linear reciprocating motions and converts hydraulic energy to mechanical energy. When hydraulic cylinder works, Reduction gear can be avoided, and there is no rotational clearance. Due to its reliable property, Hydraulic cylinder are widely applied in the mechanical hydraulic system. Hydraulic cylinder output force is proportional to the effective area of piston and the pressure difference. Hydraulic cylinder is primarily composed of cylinder, cylinder head, piston, piston rod, sealing device, buffer device, and exhaust. buffer device and exhaust are applied on a case by case basis, while other equipment are usually necessary. Hydraulic transmission and hydraulic transmission both employ working liquids for energy conversion. Hydraulic transmission is in fact a branch of liquid drive, and consists of a non rigid connection drive device made up of several impellors. This device converts mechanical energy to the kinetic energy of the working liquid, and then converts to mechanical energy again for energy transportation; hydraulic transmission employs working liquid to convert energy and perform control. Hydraulic transmission and pneumatic drive are named fluid drive，which is a new technology based on hydrostatic pressure transmission principle introduced by Pascal in the 1600. Therefore, they have been widely used a wide array of fields. This work performs systematic research into the