注塑模具毕业机械CAD图纸设计-HPVC带支承弯管成型工艺及注塑模具设计.doc

摘要 本论文基于塑料弯管注塑工艺分析及模具设计，介绍了注射成型的基本原理，对注塑产品提出了基本的设计原则；详细介绍了注射模具浇注系统和顶出系统的设计过程，并对模具强度要求做了说明。以塑料弯管模具为主线，综合了成型工艺分析，模具结构设计，最后到模具零件的加工方法，模具总的装配等一系列模具生产的所有过程。能达到很好的学以致用的效果。在设计该模具的同时总结了以往模具设计的一般方法、步骤，模具设计中常用的公式、数据、模具结构及零部件。把以前学过的基础课程融汇、综合应用到本次设计当中来。该注射模最显著的特征是避免了传统的脱模方式。该模具结构设计简单可靠，加工装配方便。 本文简要介绍了模具行业现在的情况和未来的发展趋势。提到了限制模具发展的因素。 在查阅参考文献和对塑件进行工艺性分析的基础上，确定了模具设计的整体方案。并对塑料模具的设计参数进行了必要的计算，根据计算结果选用了注射机。 最后利用AutoCAD软件对塑件外壳注射模总装配图及主要零部件进行了设计，完成了模具的整体结构设计。 关键词　注射模；顶出系统；分型面。 Abstract In this paper, based on the mouth of the bottle Cypriot injection molddesignand process analysis, This design introduced the injection takes shape the basic principle, specially single is divided the profile to inject the mold the structure and the principle of work, to cast the product to propose the basic principle of design，to the mouth of the bottle Cypriot Diemain line, the Integrated Process analysis, mold design of the structure, the last to die parts machining methods, the die assembly and a series of mold-all process. Can be good learning Zhiyong results. In the design of the mold while summing up the past die design the general methods and procedures, commonly used in the die design formula, data, structure and mold parts. Previously studied the basic courses to integrate, integrated into the design of this, the so-called good use. The first part briefly introduced mould industry and the current situation in the future. Mentioned the factors restricting the development of mold. The second part of a process of the workpiece analysis, mold design package. According to plastic mold design manual and the relevant experience of the formula necessary, according to results of the injection machine used. Further completion of the standard and non-standard choice of the design. Part III completion of the overall structure of the mold design. Keywords　 Injection Mold;Design Process;technique; Pulling structur 不要删除行尾的分节符，此行不会被打印目录 摘要 I Abstract II 第1章 绪论 1 1.1 模具工业在国民经济中的地位 1 1.2 各种模具的分类 2 1.3 我国