C8051F020程序库.docVIP

 PAGE \* MERGEFORMAT 36 240128的程序 ＃include c8051f020.h＃include tab.c＃include dis240128.c ////sfr16 DP?????? = 0x82;???????????????? // data pointersfr16 TMR3RL?? = 0x92;???????????????? // Timer3 reload valuesfr16 TMR3???? = 0x94;???????????????? // Timer3 countersfr16 ADC0???? = 0xbe;???????????????? // ADC0 datasfr16 ADC0GT?? = 0xc4;???????????????? // ADC0 greater than windowsfr16 ADC0LT?? = 0xc6;???????????????? // ADC0 less than windowsfr16 RCAP2??? = 0xca;???????????????? // Timer2 capture/reloadsfr16 T2?????? = 0xcc;???????????????? // Timer2sfr16 RCAP4??? = 0xe4;???????????????? // Timer4 capture/reloadsfr16 T4?????? = 0xf4;???????????????? // Timer4sfr16 DAC0???? = 0xd2;???????????????? // DAC0 datasfr16 DAC1???? = 0xd5;???????????????? // DAC1 data//unsigned int ad_temp,dis_y=0;unsigned char ad_i=0;char tabc;unsigned char dis_i,dis_k=0;//unsigned char t_count,t_i;unsigned int t_timecount;bit t_flag;unsigned long t_y=0;// ??? void SYSCLK_Init (void){?? unsigned int i;????????????????????????????? // delay counter?? OSCXCN = 0x67;????????????????????? // start external oscillator with?? for (i=0; i 3000; i++) ;?????????? // Wait for osc. to start up?? while (!(OSCXCN 0x80)) ;????????? // Wait for crystal osc. to settle?? OSCICN = 0x88;??? ?} ////函数名称:????? PORT_Init? ()//函数功能:????? 通用I/O口及交叉开关初始化//入口参数:????? 无//出口参数:????? 无//全局变量引用:? 无//调用模块:????? 无? // void PORT_Init (void){?? XBR1????? = 0x02;?? XBR2???? = 0x40;?? P74OUT? = 0x0f;?????????????????????? // P2口设为推挽方式?? P4=0x07;}//void T_Init(void){?CKCON=0X18;TMOD=0x15;IP=0x0a;TH0=0;TL0=0;TH1=(65536-44237)/256;TL1=(65536-44237)%256;TR1=1;TR0=1;ET0=1;ET1=1;?}// ADC0配置，T3定时启动ADC//void ADC0_Init (void){?? ADC0CN = 0x00;????????????????????? // ADC0 向AD0BUSY写1时采样,左对齐?? REF0CN = 0x03;????????????????????? // 启用内部基准源?? ADC0CF =0X40;?? AMX0SL = 0x01;?? AD0EN =1;???????????? // 选择采样输入源?? EIE2 |= 0x02;?????????????????????? // 启用 ADC 中断}