骨架零件注塑模具设计资料.docVIP

本 科 毕 业 设 计 (论 文) 骨架零件注塑模具设计 Injection Mold Design of Skeleton Parts 学 院： 机械工程学院 专业班级： 机械设计制造及其自动化 学生姓名： 学 号： 指导教师： （副教授）  2014 年 5 月 毕业设计（论文）中文摘要 骨架零件注塑模具设计 摘 要：本设计主要叙述了丙烯腈-丁二烯-苯乙烯共聚物（ABS）为材料的骨架零件注塑模具的设计过程。此模具在设计时考虑了骨架零件的生产批量及其生产效率和生产成本。此产品为方形骨架零件，其外形较为规则，中间为空心结构，其侧面有凹槽。考虑到产品需要一定的抗冲击性，耐腐蚀性及优良的电气性能。本产品选用丙烯腈-丁二烯-苯乙烯共聚物（ABS）材料。由于本产品结构为内部空心，且侧面有凹槽。所以在模具结构上必须带有抽芯结构。由于本产品的生产批量较大，故模具的自动化要求较高，所以采用斜导柱抽芯机构。在本设计中模具的结构为斜导柱固定在定模板上，斜滑块在动模板上滑动的结构形式，定位方式采用定位销和锁紧楔定位锁紧。最后由推件板将塑件推出。本设计对主要的零件都进行了设计，并在文中插入了非标准零件图。以及模具结构图。 关键词：注塑模具；侧向抽芯；骨架零件毕业设计（论文）外文摘要 Injection Mold Design of Skeleton Parts Abstract: The design of the main narrative of acrylonitrile - butadiene - styrene copolymer (ABS) for the material skeleton parts injection mold design process. This mold was designed with a production volume and production efficiency and production costs skeleton parts. This product is a square frame part, its shape more regular, intermediate hollow structure, the side grooves. Taking into account the product requires a certain impact resistance, corrosion resistance and excellent electrical properties. This product is made of acrylonitrile - butadiene - styrene copolymer (ABS) materials. As the product structure is hollow inside, and the side grooves. So in the mold structure must be drawn with the core structure. Due to the large batch production, so the higher the mold automation requirements, so the use of bevel pillar core-pulling mechanism. Its structure is substantially inclined pillar in the fixed mold, oblique slider movable mold structure. Its positioning using wedge structure positioning. , Pulling oblique lateral pillar classification. Finally, the board will push plastic parts available. The design of the main parts of the design are carried out and insert a non-standard parts diagram in the text. And the structure of the mold. Keywords: Injection mol