水泥厂配料系统.docVIP

基于PLC的石灰石破碎及预均化系统电气控制 摘 要 该文首先全面阐述了设计该文的背景以及我国水泥行业的发展；从分析水泥厂自动配料的工艺过程出发，首先分析控制回路，在其基础上设计控制策略，确定合理的控制方案；其次分析需要的控制点，有备妥信号，应答信号，报警信号，电机的启停，流量的检测，配比的设置等。统计I/O点数，画出系统工艺流程图和控制回路图，以及控制回路接线图；然后选择组态软件为北京三维力控科技有限公司的工业监控组态软件Forcecontrol6.1，对力控组态软件进行了学习和应用，做出监控界面组态，数据库组态，曲线组态等。最后连接上位机与可编程逻辑控制器PLC，进行调试和运行。 通过电子称的应用来进行物料的称量以及调节。来实现对物料添加量的控制，按一定的比例控制确保质量。 该设计通过计算机监控系统实现了对水泥厂配料系统现场的监控和管理。不仅提高了生产的质量和产量，而且降低了生产过程中的能耗，提高了效率。 关键词：电子皮带称，组态，PLC,自动配料，控制系统. The Design Of Automatic Batching Control System in Cement based on PLC ABSTRACT This paper first comprehensively expounded design based background and the development of Chinas cement industry; From analyzing the process of automatic batching cement plant, first analysis control circuit based on its basis, design and control strategy, the determination of reasonable control scheme; Secondly, the control point analysis needed to prepare signals, response signal, alarm signal, motor start-stop, flow testing, the matching Settings etc. Statistics I/O points, draw the system process flow diagram and control circuit diagram, and control circuit wiring diagram; Then select configuration software for the Beijing 3d force control technology Co., LTD. Of industrial control configuration software, Forcecontrol6.1 to force control configuration software in learning and application, make monitoring interface configuration, database configuration, curve configuration, etc. Finally connected PC and PLC (programmable logic controller, commissioning and operation. Through the application of electronic scale to materials weighing and adjusting. To realize the control of material additives, press the certain proportion control to ensure quality. This design through a computer monitor system realize the cement mixing system site monitoring and management. Not only improve the production quality and yield, and reduces the production process of the energy consumption and improve efficiency. KEY WORDS: electronic belt says, configuration,