分层带规程.docVIP

分层输送带硫化接头操作规程Splicing procedures of the multi-plied belt 输送带的接头是胶带使用过程中一个十分重要的环节，它决定着胶带输送机能否正常运转，关系到用户的经济效益和生命财产安全。因此，需要注意在胶接过程中的一些问题，如要了解胶带的型号、选择好胶接长度系数、计算接头阶梯长度，把握好所要胶接输送带是普通用途的，还是难燃、耐热、耐酸碱等。胶接哪一种胶带就要用哪一种胶料。 我公司为了更好地为广大用户服务，根据分层输送带胶接的实际情况，特制定本输送带的现场胶接规程。 Belt conveyers deal with contact is a very important link in the tape usage process, it decide the tape transports function to deny a normal operation, relating to to the economic performance and life property safety of the customer.Therefore need to be notice to connect some problems in the process in the gum, if want to understand the model number of the tape and choose good gum to connect length coefficient,calculation to deal with contact the stairs length, confidence the good gum want connect belt conveyer is a common use of, still difficult combustion,heat-proof and acid-proof alkali etc..Which kind of tape gum connect to will use which kind of gum anticipate. My company connects according to the layering belt conveyer gum for serving for the large customer betterly of actual circumstance, the specially made settles the spot gum of this belt conveyer to connect a rules distance. 胶接胶料的准备 1、The gum connects the preparation that the gum anticipate 1.1胶接中需用覆盖胶、贴胶、胶浆等物料。在胶接前需备齐。由于各公司配方不同，为不影响胶接质量，建议使用本公司生产的胶料。 1.2如没有提供胶浆，则用贴胶料与120#溶剂汽油配置胶浆。将胶料与汽油按重量比1：4或1：5放在一起，在泡制的过程中不断的搅拌，以使得胶料能完全溶化。最好在胶接前3天制作胶浆。 1.1 gums connect to win to need to use to overlay gum and stick materials, such as gum and the gum syrup...etc..Need to be square away before connect in the gum.Because each company formulation is different, in order to dont influence gum to connect quality, suggestion usage our company produce of the gum anticipate. 1.2 such as do not provide the gum syrup, then use to stick gum to anticipate to install the gum syrup with 120# melting agent gasoline.Anticipate gum with gasoline to compare according to the weight 1:4 or 1:5 put together, the continuous agitation can melt completely with making the gum anticipate in t