OTN-training.docVIP

OTN学习笔记 光传送序列（OTH）支持各种体系结构（即点对点、环形和网孔形体系结构）光网络的运行和管理。 依据光传送序列（OTH）、多波长光网络支持中的开销功能、帧结构比特率及映射客户信号的方式，本建议定义了光传送网络的接口，以便将这些接口用于光网络的子网内部和子网之间。 2、optical transport module (OTM-n.m): The OTM is the information structure that is transported across an ONNI. The index n and m define the number of supported wavelengths and bit rates at the interface. Two OTM structures are defined: The OTM with full functionality (OTM-n.m) is the information structure used to support optical transmission section (OTS) layer connections in the OTN. The characteristic information of the optical transmission section layer (OTS_CI) consists of information payload (OTS_CI_PLD) and optical transmission section overhead information fields (OTS_CI_OH). The optical transmission section overhead (OTS_OH) information fields are contained within the OTM overhead signal (OOS) information structure. The OTM-n.m consists of up to n multiplexed optical channels and an OTM overhead signal to support the non-associated overhead. The OTM with reduced functionality (OTM-nr.m/OTM-0) is the information structure used to support optical physical section (OPS) layer connections in the OTN. The characteristic information of the optical physical section layer (OPS_CI) consists of information payload (OPS_CI_PLD). OTM-0 consists of a single optical channel without a specific colour assigned. The OTM-nr.m consists of up to n multiplexed optical channels. Non-associated overhead is not supported 光传送模块（OTM）：OTM是穿越ONNI传送的信息结构。n和m定义了接口支持的波长数量和比特率。定义了两种OTM：完全功能OTM（OTM-n.m）和简化功能OTM（OTM-0和OTM-nr.m）。 完全功能OTM（OTM-n.m）是用于支持OTN中光传输段（OTS）层连接的信息结构。光传输段层的特征信息（OTS_CI）由信息净荷（OTS_CI_PLD）和光传输段开销信息（OTS_CI_OH）组成。光传输段开销（OTS_OH）信息包含在OTM开销信号（OOS）信息结构中。为了支持非联合开销，完全功能OTM-n.m由最多n个复用的光信道和一个OTM开销构成。 简化功能OTM（OTM-nr.m/OTM-0）是用于支持OTN中光物理段（OPS）层连接的信息结构。光物理段层的特征信息（OPS_CI）由信息净荷（OPS_CI_PLD）组成。OTM-0由不具有分配特定颜色的单个光信道构成。OTM-nr.m最多由n个复用光信道组成。不支持非联合开销。 3、optical channel (OCh[r]): The OCh is the information structure used to support the OCh trail. Two OCh