LR1750技术说明.docVIP

技术说明 LIEBHERR LATTICE BOOM CRAWLER CRANE TYPE LR 1750 利勃海尔桁架臂履带式起重机，型号LR 1750 Max. Capacity: 750 t at 8 m radius.SDB/BW - System with S 35 m. 最大起重能力： 750吨，8米半径 SDB/BW工况 - 主臂S长35米 Max. load moment: 9.640 tm - 482 t at 20 m radius.SDB/BW - System with S 42 m. 最大起重力矩： 9640吨米 - 482 吨，20米工作半径 SDB/BW - 主臂S长42米 CRAWLER CHASSIS Liebherr crawler chassis, consisting of one centre section and two crawler track carriers. Standard track width: 8,8 m Overall width: 10,3 m Length: 11,9 m Height: 2,31 m Ground clearance: 0,45 m Driving force 2/4 drive systems: 2740 kN / 5480 kN Travel speed: 0-1,65 km/h infinitely variable 起重机底盘 利勃海尔履带底盘，包括一个中间体架和两条履带。 标准轨距： 8.8米轨距总宽： 10.3米长度： 11.9米高度： 2.31米离地间隙： 0.45米驱动力2液压驱动系统： 2740千牛 行驶速度： 0-1.65千米/小时无级变速 Frame Liebherr designed and manufactured, box type torsion resistant welded construction. Consisting of high tensile fine grain structural steel. Consisting of torsion resistant centre section and two crawler track carriers. Crawler track carriers are hydraulically pinned to the centre section. 车架 利勃海尔自行设计和制造，为箱形抗扭焊接结构 由高强度细晶粒结构钢制成 包括抗扭中间体架和两条履带 履带与中间体架液压销钉连接 Driving gear, double The travel drive is powered from the crane engine in the superstructure. One hydraulic drive system per crawler track. Spring applied disc brakes, hydraulically released for travelling. Both crawler chains are independently controlled for synchrony or counter rotation drive mode. Travelling speed is infinitely variable. 双马达驱动 驱动力来源于起重机上车发动机。 每一条履带分别由一个独立的液压系统驱动。 行走制动通过液压释放弹簧加载的刹车实现。 两条履带可独立控制进行同向或反向驱动行走。 行驶速度可无级变速。 Crawler pads Crawler pads with 1,5 m width. 履带板 履带板宽度1.5米 Centralised lubrication One central lubrication system per crawler carrier for: Crawler rollers. Turas bearing. 集中润滑系统 每一条履带分别有一个集中润滑系统，用于： 支重轮 拖带轮 Central ballast base plates 20 t Consisting of two base plates of 10 t each Fixed to the centre