FGL_GP12_PROCESS_TRAINING_培训.pptxVIP

GP-12Early Production Containment Procedure 早期生产件遏制程序 GP-12 -- Early Production Containment Procedure GP-12—早期生产件遏制程序 Key GP-12 Process and Procedure Questions ? 关于GP12程序和过程的普遍问题 What is GP-12?什么是GP12? Why do we perform GP-12?为什么我们要执行GP12? Who will perform GP-12?谁来执行GP12程序？ When do we perform GP-12?什么时候执行GP12? How do we perform GP-12?如何执行GP12? Purpose目的 ? Validate the supplier’s production control plan. 验证供应商生产控制计划 ? Protect assembly, manufacturing centers, and service part warehouses from quality non-conformances during critical periods. 保护在特定阶段总装，制造和售后不会接收到不合格品 ? Ensure that any quality issues that may arise are quickly identified, contained, and corrected at the supplier’s location. 保证可能发生的质量问题在生产过程中被识别，修正 GP-12 -- Early Production Containment Procedure GP-12—早期生产件遏制程序 Definition and Necessary Input 定义及必要输入 Pre-Launch Production Control Plan ? 批量生产前控制计划 Is a significant enhancement to the supplier’s production control plan and raises the confidence level to ensure that all products shipped will meet GM’s requirements. The pre-launch control plan will also serve to validate the production control plan. GP-12 Audit GP-12评审 GP-12 -- Early Production Containment Procedure GP-12—早期生产件遏制程序 Entrance Criteria 进入程序标准 GP-12 is to be used for all pre-production, production, service, and accessory parts at the time of PPAP. GP12程序是适用于PPAP阶段所有的试生产，生产，服务及附件产品 This procedure applies to all new and changed parts that require PPAP for start-up, acceleration, or revisions to the manufacturing process. Also, when manufacturing runs are separated by 3 months or more. GP12程序适用于所有新变更的需要PPAP启动，产能提升，或者生产程序变更，或者生产间断3个月以上 GP-12 -- Early Production Containment Procedure GP-12—早期生产件遏制程序 Identification 标签识别 Compliance to identify GP-12 was performed on parts that are being shipped to the customer is… 执行GP12程序过程中应使用的标签 Attach to each shipping label a 25mm (approx.) green, circular sticker. 标签为直径25mm的绿色圆形标签，贴附于每个独体发送包装上面 Signed by a designated senior management representative accou