毕业设计（论文）-抚顺某宾馆中央空调系统设计.doc

PAGE PAGE 51 抚顺某宾馆中央空调系统设计 摘 要 随着科学技术的发展以及人民生活水平的提高，空调技术的利用越来越广泛，给人类营造了健康舒适的生活环境。 而本设计的内容是抚顺某宾馆中央空调系统，通过对不同功能区域进行划分，从而将整个空调区划分为： a、风机盘管加新风系统； b、全空气处理系统； c、超薄吊顶式空气处理系统。 在冷负荷计算的基础上完成主机和风机盘管的选型，并通过风量、水量的计算确定风管路和水管路的规格，并校核最不利环路的阻力和压头用以确定新风机和水泵。 依据相关的空调设计手册所提供的参数，进一步完成新风机组、水泵、热水机组等的选型，从而将其反应在图纸上，最终完成整个空调系统设计。 关键词：中央空调，负荷，选型，管路设计 A Design of a Hotel’s Central Air-conditioning System in FuShun Abstract With the development of science technology and the increasing of living standard, the air-condition technology has been taken an abroad use, which built a healthy and comfort habitation for people. The designs included the system of a certain hotel’s center air-condition in FuShun . The whole air-condition section was plotted according to the different function-region, including: A. fan coils and the system of fresh air B. all-air system C. microtome-ceil air system The main-machine and fan coils’ choice were based on the calculation of cold-load. And through the numeration of blast volume and water flux，the standard of air duct and water pipe was determined. The most disadvantage resistance and pressure of the loop-road were checked up to ensure the machine of fresh-air and water pump. According to the parameter which was offered by the correlate air-condition design handbook, the choice of fresh-air machine, water pump and the hot water machine was finished. Then the part of the sanitation-hot-water was performed. At last, the whole design was shown on the drawing. Keyword: center-air-condition, load, lectotype, piprline design 目 录 摘要 I TOC \o 1-3 \h \z \u HYPERLINK \l _Toc137520861 Abstract PAGEREF _Toc137520861 \h II HYPERLINK \l _Toc137520862 第一章 工程概况 PAGEREF _Toc137520862 \h 1 HYPERLINK \l _Toc137520863 第二章 设计依据 PAGEREF _Toc137520863 \h 2 HYPERLINK \l _Toc137520865 2.2设计规范及标准 PAGEREF _Toc137520865 \h 2 HYPERLINK \l _Toc137520866 2.3基本气象参数 PAGEREF _Toc137520866 \h 2