毕业设计（论文）-机车气缸缸盖数控加工工艺和夹具的设计.doc

PAGE PAGE III 摘要 本文主要研究机车气缸缸盖数控加工工艺和夹具的设计，机车气缸缸盖是机车气缸的重要的组成部分，它在气缸体上部封闭的燃烧室，并与活塞顶部一起形成燃烧室。随着发动机技术的飞速发展现代气缸盖的结构也越来越复杂，加工难度越来越大，精度要求越来越高。而且先进的内燃机越来越多地倾向于采用多气门机构这使得气缸盖加工变得越来越困难，气缸缸盖的加工工艺以及夹具设计一直以来是国内外加工的重点，难点。 本课题主要研究机车气缸缸盖加工工艺以及专用夹具的设计，夹具设计旨在能够达到快速装夹，定位。结合实际，确保加工质量的前提下，达到提高生产速率，降低生产成本 关键词：气缸盖 加工工艺 专用夹具 ABSTRACT This paper studies motorcycle cylinder head machining process and fixture design， motorcycle cylinder head is an important part of the cylinder。It closed in the upper part of the cylinder combustion chamber, and together form a combustion chamber and piston top。With the rapid development of modern engine technology structure of the cylinder head more and more complex, more and more difficult process, more and more high precision。And advanced internal combustion engines tend to use more and more multi-valve cylinder head body which makes it increasingly difficult, and the cylinder head of the fixture design process has always been the focus of domestic processing and difficult The main topic of motorcycle cylinder head processing technology and a dedicated fixture design, fixture design to be able to achieve rapid clamping, positioning. Reality, the premise of ensuring the quality of processing, to increase production rates, lower production costs Keywords: cylinder head ;processing ;special fixture 目录 PAGE IV TOC \o 1-3 \h \z \u HYPERLINK \l _Toc295823513 摘要 PAGEREF _Toc295823513 \h I HYPERLINK \l _Toc295823514 ABSTRACT PAGEREF _Toc295823514 \h II HYPERLINK \l _Toc295823515 第1章绪论 PAGEREF _Toc295823515 \h 4 HYPERLINK \l _Toc295823516 1.1气缸缸盖简介 PAGEREF _Toc295823516 \h 4 HYPERLINK \l _Toc295823517 1.2气缸缸盖国内外发展的现状 PAGEREF _Toc295823517 \h 1 HYPERLINK \l _Toc295823518 1.3 本次论文研究的内容和意义 PAGEREF _Toc295823518 \h 1 HYPERLINK \l _Toc295823519 第2章气缸缸盖的工艺设计 PAGEREF _Toc295823519 \h 2 HYPERLINK \l _Toc295823520 2.1 机车气缸缸盖的三维建模 PAGEREF _Toc295823520 \h 2 HYPERLINK \l _Toc295823521 2.2零件的工艺分析 PAGEREF _Toc295823521 \h 3 HYPERLINK \l _Toc29582352