搪瓷釜英文介绍.docVIP

搪瓷釜英文介绍 搪瓷釜 概述 技术指标 发展趋势 瓷釉成份 一．搪瓷釜是搪瓷反应釜、搪瓷蒸馏釜、搪瓷储存釜的简称，又称搪玻璃罐或搪玻璃反应釜，搪瓷釜是将含高二氧化硅的玻璃，衬在钢制容器的内表面，经高温灼烧而牢固地密着于金属表面上成为复合材料制品。所以，它具有玻璃的稳定性和金属强度的双重优点，搪瓷设备具有耐酸、耐碱、耐冲击和耐温变等优良性能，是一种优良的耐腐蚀设备。已广泛地应用于化工、石油、医药、农药、食品等工业。 搪瓷釜分：电加热搪瓷釜和蒸汽加热搪瓷釜。 Enamel kettle Summary of a. 2. Technical indicators 3. The development trend 4. Porcelain glaze ingredients A. The enamel kettleIs enamel, enamel reactor still short for store, enamel kettle, also known as the glass lining pot or glass lining reactor, enamel kettle is to contain high silica glass, lined on the inner surface of the steel container, high-temperature calcination and firmly on the metal surface be composite material products. So, it has the double advantage of the intensity of the stability of the glass and metal, porcelain enamel equipment has the acid and alkali resistance, impact resistance and heat resistance performance, is a kind of excellent corrosion resistant equipment. Has been widely used in chemical, petroleum, medicine, agricultural chemicals, food and other industries. Enamel kettle points: electric heating enamel reactor and steam heating enamel reactor. 技术指标 1、使用压力：0.2---0.4Mpa 2、耐酸性： 对各种有机酸、无机酸、有机溶剂均有较好的抗蚀性。如将我厂生产的搪玻璃试样置于20%HCI溶液中煮沸48h，腐蚀速率为0.9lg/m2.d（优等品指标为1.0g/m2.d）。 3、耐碱性： 搪玻璃对碱性溶液抗蚀性较酸溶液差。但将我厂搪玻璃试样置于1N氢氧化钠溶液腐蚀，试 验温度80时间48h。腐蚀速率为6.76g/m2.d（优等品指标为7.0g/m2.d）。 4、操作温度：搪玻璃设备加热和冷却时，应缓慢进行。我厂制造的搪玻璃设备使用温度为0－200，耐温急变性≥200。 5、瓷层厚度：玻璃设备的瓷层厚度0.8-2.0mm，搪玻璃设备附件的瓷层厚度0.6-1.8mm。 6、耐压电：搪玻璃具有良好的绝缘性，当搪玻璃在规定厚度内用20KV高频电火花检查瓷层时，高频电火花不能击穿瓷层。 7、耐冲击性：玻璃层的内应力越小，弹性越好，硬度越大，抗弯抗压强度越高，则耐冲击就越好。我厂之玻璃层在规定厚度内，用直径30mm，重量112g钢球冲击时，其冲击功为282×10-3J（优等品指标为260×10-3J）。 A. Technical indicators 1, the use of pressure: 0.2-0.4 Mpa 2, resistant to acid: For a variety of organic acid, inorganic acid, organic solvent has good corrosion resistance. If put my factory production of glass lining sample at 20% HCI solution boiling 48 h, corrosion rate is 0.9 lg/m2. The d (classy article index was 1.0 g/m2. D). 3, alkali resistance: Corrosion resistance