NHEUT_YPL04_CaseStudy_v0.2_CN.pptx

YPL04：Case StudyYPL04 : Gatehouse – Special Damaged Container Handling 学习目标Learning Objectives 学完该课程后您应该可以： After completing this module you will be able to: 处理特殊操作案例 Handle Special Case 在 Navis N4 中将损坏集装箱由堆场移到维修场 Process damage containers from yard to repair shop in Navis N4 在 Navis N4 中将损坏集装箱由维修场移到堆场 Process damage containers from repair shop to yard in Navis N4 讲题 1Topic 1 处理损坏集装箱和集装箱维修Handle Damage Container And Container Repair 1.1 损坏集装箱概述1.1 Damage Container Overview  操作 单元 损坏 Operation Unit Damages 损坏集装箱图标 Damage container Icon 报告生成时间 = 记录损坏开始时间 Reported = Record Damage Start Time 修复完成时间 = 记录修复结束时间 Repaired = Record Repaired End Time N4 更新单元层次内的损坏详情 N4 Update Damage Details In Unit Level 操作 单元 行为 更新 损坏 Operation UnitActionsUpdateDamages 要将损坏项目标记为已修复，请在修复时间字段中输入日期。To mark a damage item as repaired，enter a date in the Repaired On field. 1.1 损坏集装箱概述1.1 Damage Container Overview  N4 Mobile 更新堆场内的损坏详情 N4 Mobile Update Damage Details In Yard 使用 N4 Mobile 堆场检查 按 “D” Use N4 Mobile Yard InspectionPress “D” 1.1 损坏集装箱概述1.1 Damage Container Overview  1.2 使用损坏修复指令的特殊装载 ID（BSL、YP、STO、CIMC）1.2 Special stow ID for damage repair instruction useful (BSL,YP，STO，CIMC) 特殊装载 ID =（BSL、CIMC、STO、YP） Special Stow ID = (BSL，CIMC，STO，YP) 使用修复指令的“特殊装载 Id”。 “Special Stow Id” use for repair instruction. 特殊装载 – 描述 Special Stow – Description BSL - 将集装箱由堆场移到BSL 维修场Container from Yard to BSL repair shop CIMC - 将集装箱由堆场移到 CIMC 维修场Container from Yard to CIMC repair shop STO - 将集装箱由堆场移到 STO 维修场Container from Yard to STO repair shop YP - 将集装箱由堆场移到 YP 维修场Container from Yard to YP repair shop 1.3 必须在修复指令的“特殊装载 3”字段中输入特殊装载 ID1.3 Must be input Special Stow ID in “Special stow 3” field for repair instructions 特殊装载 ID -“特殊装载 3” Special Stow ID - “Special stow 3” 必须在修复指令的“特殊装载 3”中输入特殊装载 Special Stow Must be input in “Special Stow 3” for repair instructions 注意 Attention 1.4 损坏事件 1.4 Damage Events  UNIT_REPAIRED： 单元之前未损坏，现在记录新的损坏（包括修复日期）。如果您将现有损坏更新为已修复，同时还