微控课设陶瓷隧道窑.docVIP

陶瓷隧道窑微机温度控制系统 摘 要 关键词：隧道窑、计算机、温度控制 隧道窑一般是一条长的直线形隧道，其两侧及顶部有固定的墙壁及拱顶，底部铺设的轨道上运行着窑车。目前我国陶瓷隧道窑炉大多采用人工或简单仪表控制，要想使窑炉长期达到最佳工作状态是不可能的，造成产品合格率、一级品率一直处于较低的水平。陶瓷隧道窑炉是由预热带、烧成带和冷却带三个部分组成，瓷件烧成温度在1320℃左右，若用人工控制这个温度场，不仅控制上有难度控制精度上的问题更大，因此，我们此处引入了计算机控制，通过采集各点的温度，然后通过A/D转换送入计算机与设定值进行比较，再输出并经过相应的硬件进行处理后输出到执行机构进行控制，它不仅能改善控制的精度，还能用软件代替一些硬件，大大的降低了成本，更主要的是解放了人的劳动力。 Ceramic tunnel kiln temperature control system computer Abstract Key words: tunnel kiln, computers, temperature control Tunnel kiln is a general linear-long tunnel on both sides and the top of its walls and roof fixed, the laying of the track at the bottom of the kiln car running. At present, most of Chinas ceramic tunnel kiln or a simple manual control instruments in order to ensure the kiln to achieve the best long-term work status is not possible, resulting in the passing rate of products, product rate level has been at the lower level. Tunnel Kiln Ceramics by preheating zone, firing zone and cooling zone is composed of three parts, pieces of porcelain firing temperature of about 1320 ℃, using the manual control of the temperature field, not only difficult to control on the control precision of the problem For this reason, We here introduced a computer-controlled by the temperature of collection points, and then through the A / D converter into the computer and compare the settings, and then through the corresponding output and hardware processed output to the control of implementing agencies, which not only to improve the accuracy of control, but also a number of software instead of hardware, greatly reducing costs, more important is the liberation of the peoples labor. 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc234916070 陶瓷隧道窑微机温度控制系统 PAGEREF _Toc234916070 \h - 1 - HYPERLINK \l _Toc234916071 摘 要 PAGEREF _Toc234916071 \h - 1 - HYPERLINK \l _Toc234916072 Ceramic tunnel kiln temperature control system computer PAGEREF _Toc234916072 \h - 2 - HYPERLINK \l _Toc234916073 Abstract PAGEREF _Toc234916073 \h - 2 - HYPE