UPFs.docVIP

Chapter 10. User Routines and Non-Standard Uses ·用户程序和非标准用法 10.1. User Programmable Features (UPFs) ·用户可编程特点 The ANSYS programs open architecture allows you to link it to your own FORTRAN routines and subroutines. In fact, some of the ANSYS features you see today as standard offerings originally started as user-programmed features. This chapter provides a basic introduction to UPFs. For detailed information, see the ANSYS Guide to User Programmable Features. ·ANSYS程序开放式结构允许将其与FORTRAN程序和子程序连接。实际上一些现在用作标准的特性也是源于用户可编程性。本章即对用户可编程性作一个基本介绍，具体细节参照ANSYS Guide to User Programmable Features 10.1.1. What Are UPFs? ·什么是用户可编程性 User programmable features (UPFs) are ANSYS capabilities for which you can write your own FORTRAN routines. UPFs are only available in the ANSYS/Multiphysics, ANSYS/Mechanical, ANSYS/Structural, ANSYS/PrepPost, and ANSYS/University (Research Faculty/Student version) products. ·用户可编程性是指用户可用FORTUAN语言的特性。用户可编程性只适用于ANSYS/Multiphysics, ANSYS/Mechanical, ANSYS/Structural, ANSYS/PrepPost, 和ANSYS/University (Research Faculty/Student version)产品。 UPFs allow you to customize the ANSYS program to your needs, which may be a user-defined material behavior option, a user element, a user-defined failure criterion (for composites), and so on. You can even write your own design optimization algorithm that calls the entire ANSYS program as a subroutine. ·UPFs允许将ANSYS程序根据需要用户化，如材料特性、单元、失效准则等。甚至可以编写最优化算法作为整个ANSYS程序的子程序 Note Using UPFs requires extreme care and thought on your part. By linking in your own FORTRAN routines, you are creating a customized, site-dependent version of the ANSYS program. In addition, when you use UPFs, you are using ANSYS in a non-standard way, one that ANSYS Inc.s Quality Assurance verification testing program does not cover. You are responsible for verifying that the results produced are accurate and that the routines you link to ANSYS do not adversely affect other, standard areas of the program. ·注意 使用UPFs需要高度的小心与考虑。在你自己的FORTRAN程序中，是创建一个用户化自我依赖的AN