密封故障维修11.pptxVIP

An overview of seal troubleshooting密封故障维修的总括11Steven_TianjinVIBRATION AT THE SEAL FACES密封表面的振动Harmonic vibration.谐波振动The seal is vibrating in harmony with some rotating component. The same thing that causes a rear view mirror to vibrate in an automobile. Most harmonic vibration can be stopped by changing the speed of the equipment or damping the vibrating component密封与一些旋转元件谐波振动.同样的事情引起在汽车中后视镜的振动.大多数的谐波振动能够通过改变设备的速度或 “阻尼”振动元件来停止VIBRATION AT THE SEAL FACES密封表面的振动Slip stick--caused by:滑动粘附现象—由以下因素引起Poor lubricating fluids. 不好的润滑溶液Hot water. 热水Solvents.溶剂Some detergents. 一些清洁剂Gases 气体Dry running applications. 干的运行应用VIBRATION AT THE SEAL FACES密封表面的振动Too high a face load. 太高的面负载Using unbalanced seals. 使用不平衡密封Poor installation technique. 不好的安装技术Face load has changed because of temperature growth or impeller adjustment. 由于温度增长或叶轮的调整的面负载的变化You are using a high friction face combination. Often occurs if you use two hard faces你使用一个高磨擦面结合.如果你使用两个硬面,经常发生.VIBRATION AT THE SEAL FACES密封表面的振动A discharge recirculation line aimed at the seal faces.排放口再循环管线对着密封面Each time the impeller passes the recirculation connection it causes a pulse of fluid at the seal face.每次叶轮通过循环管线连接,引起一个在密封面的振动VIBRATION AT THE SEAL FACES密封表面的振动Vaporization of the product at the seal face.产品在密封面的汽化Happens frequently with products that contain water, and are operated at elevated temperature. 经常发生在产品含有水,并且运行在升高的温度的情况下Can occur at the seal face because of high face load or if you use unbalanced seals能够发生在密封面,因为高的面负载或如果你使用不平衡密封