螺纹形式对应表.docVIP

螺纹形式对应表 BSPP（British Standard Parallel Pipe Tapped）-对应国标中的G系列，密封垫密封 BSPT（British Standard Pipe Tapped）-对应国标中的ZG(R)系列，四氟带密封 NPT –?（National Pipe Taper Thread）对应国标中的Z系列。四氟带密封 Coupling Identification - British There are five coupling systems generally used for hydraulic connections today. They are identified geographically or by country as: North American British French German Japanese British Thread Types It is a common misconception that all foreign thread types are metric. This is not always the case. There are two common thread forms: metric and Whitworth (BSP). The country of origin and the proper nomenclature for each is listed below. British Standard Pipe ParallelBritish Standard Pipe Tapered British Standard Pipe Parallel Popular couplings have British Standard Pipe (BSP) threads, also known as Whitworth threads. These can be parallel(BSPP) or Tapered, with a 30° inverted flare. Flanges are equivalent to SAE Code 61 or Code 62 (except -10*). Port connections are usually made with BSPP threads and a soft metal cutting ring for sealing. The BSPP (parallel) male will mate with a BSPP (parallel) female or a female port. The BSPP male has straight threads and a 30° seat. The BSPP female has straight threads and a 30° seat. The female port has straight threads and a spotface. The seal on the port is made with an O-Ring or soft metal washer on the male. The BSPP (parallel) connector is similar to, but not interchangeable with, the NPSM connector. The tread pitch is different in most sizes, and the tread angle is 55° instead of the 60° angle found on NPSM threads. *(-10 is a non-SAE size flange) Dash Size NominalSize(in.) ThreadSize Male ParallelThreadO.D. (in.) Female ParallelThreadI.D. (in.) -2 1/8 1/8-28 3/8 11/32 -4 1/4 1/4-19 17/32 15/32 -6 3/8 3/8-19 21/32 19/32 -8 1/2 1/2-14 13/16 3/4 -10 5/8 5/8-14 29/32 13/16 -12 3/4 3/4-14 1 1/32 31/32 -16 1 1-11 1 11/32 1 7/32 -20 1 1/4 1 1/4-11 1 21/32 1 17/32