浅谈粉末静电喷涂在高速公路护拦板上的应用.docVIP

浅谈粉末静电喷涂在高速公路护拦板上的应用 对高速公路护拦板的要求，随着我国高速公路建设的发展而日益增多。由于防护拦板安置在露天，受气候及环境的影响，因此防护拦板的表面涂装技术要求较高，使表面涂膜有良好的耐候性、抗腐蚀等性能，外观具有理想的装饰性。我国高速公路防护拦板以热镀锌板为多，其外观颜色单一，而耐候性及抗腐蚀等性能均低于粉末静电喷涂板的性能，而且粉末静电喷涂工艺的无污染、粉末颜色的多样化更是其他涂覆工艺所不能比拟的。目前国外已大量使用粉末静电喷涂防护拦板。 Demand for highway guard rail board, with the development of our country highway construction and on the rise. Due to the protective stop plate placed in the open air, under the influence of climate and environment, so the surface coating of protective block board technology demand is higher, the surface coating has good weather resistance, corrosion resistance and other properties, has the ideal decorative appearance. Highway protection block board in China is hot galvanized sheet for many, the appearance of a single color, and weather resistance and corrosion resistant performance is lower than the performance of the powder electrostatic spraying plate, and the powder electrostatic spraying process of the diversification of pollution-free, powder color is cant be matched by other coating processes. Currently abroad has extensive use of powder electrostatic spraying protective block board. 为适应我国高速公路护拦板的发展要求，浙江大学涂装技术工程公司设计制造了一条年产量为600公里护拦板的粉末静电喷塑生产线。从设备实际使用情况来看，此生产线达到了设计指标，喷涂产品性能较好。 In order to adapt to the development of Chinese highway guard rail plate requirements, the coating technology of zhejiang university engineering company designing and manufacturing a annual output is 600 km barrier plate electrostatic powder coating production line. From equipment practical application, the production line has reached the design target, spray product performance is better. 1 生产线工艺概述 1 production line process overview 此生产线由两条流水线组成：第一条，半自动槽浸式工件前处理及工件脱水流水线；第二条，全自动工件静电喷粉及工件粉末固化流水线。 This production line consists of two lines: the first, semi-automatic slot immersion type work-piece before treatment and dehydration lines; Second, automatic electrostatic powder spraying workpiece and workpiece powder curing line. 1.1 槽浸式前处理工艺 1.1 tank before immers