火警紧急程序pp001.docVIP

OBJECTIVE: 目标 In case of fire alarm or fire, this procedure should be used for guiding the staff of Fraser Place Serviced Residence (FPSR), they should know and undertake the job and mission, protect the personal and property, prioritize safety of the guests and employees and build up the safety system and approach. 该程序用于指导深圳fraesr公寓管理层及员工当大厦发生火警和火灾，他们应清楚承担的职责和任务，保护公寓内客人和员工的人身、财产安全，建立安全体系和步骤。 SCOPE：范围 All staff 全体员工 The basis of this procedure:制定本程序的依据 《 The Peoples Republic of China Fire Prevention Regulations 》 and the relevant provision ofThe management district of this procedure: 本程序的管理区域范围 The block A, B, C, D, E, F and G of Fraser Place Serviced Residence Shekou-Shenzhen. 深圳fraesr公寓管理有限公司管理区域安柏丽晶第五栋全区域 According to the actual circumstance, this procedure enact three projects to meet different emergencies: 根据在实际操作中不同的情况，本程序设定不同的应急方案，以下分三个不同等级的消防应急程序： 1、The definition of first, second and third class fire alarm and the processing procedureDetailed procedure of each section in the case of fire alarm 火警时各部门详细分工程序 3、Urgent evacuation procedureFraser Place Serviced Residence Shekou-Shenzhen is responsible for the hermeneutic power of the originally urgent procedure and evacuation project 本紧急程序及疏散方案的解释权由FRAESR公寓管理有限公司全权负责 First class fire alarm 一级火警 First class fire alarm definition:一级火警定义 The switchboard receives a single alarm (smoke fire director, heat fire director and the single breaking glass alarm) sent by the fire fighting supervision center ,or by employees telephone alarm (do not see clear fire and smoke, but something smells burnt), confirming to first class fire alarm. 总机接到消防监控中心监控员发出烟感、温感、破玻璃信号报警，或接到员工电话报警（没有见到明火及烟，但闻到有糊味及烧焦的味道），确认为“一级火警”。 Processing procedure of first class fire alarm :一级火警处理程序 The fire fight control centre dial the switchboard and tell the detailed address and the fire alarm category (the smoke fire detector, the heat fire detector or the breaking glass signal), and record the telephone time, the switchboard membe