佳能mp288拆解步骤.docxVIP

佳能mp288拆解步骤?最近比较烦，打印机关键时刻坏掉了。进纸故障，导致无法打印。经上网搜索故障原因，怀疑是进纸感应器的问题，一般不会坏掉，只是需要清洁一下。不得不佩服佳能的工程师，把个机器设计的卡扣多过螺丝，先后2次准备拆解机器，都是无从下手，只能无功而返。只好再次求助网络，没想到诺大个互联网居然找不到拆解步骤，送维修伤不起啊，为了在论坛里面下载个文件，账号居然也被封了，也许是被当做灌水的了。也罢，逼上梁山，求人不如求己，闲言少叙，下面开始拆解。仅供参考，后果自负哦。?第一步：拆后盖。无需多言，先拧下后面的2个螺丝。后面板下方有3个卡扣，一定要向上提才能拿下来，我就是一不小心将中间的卡扣弄坏了，不过不影响大局，无足轻重了。没有仙人指路，第一个吃螃蟹，就要付出代价啦！这个第一次比较费劲，要点：1卸掉打印机后面两颗很明显的螺丝之后就不要卸掉其他螺丝了，这两颗就够了。2将后面板竖直向上提，使点劲。3其实后面板最下面有三个卡扣自然就掉开了?在这里可以清晰的看到废墨收集器的全貌，如果满了的话，就需要处理一下喽。??这个会看的更清楚些。第二步，拆除扫描仪面板。这个简单，就不上图了。第三步，拆除操作面板，如图，要小心点，不要用力过猛，最好借助小改锥，都是卡扣。?第四步，拆除右侧挡板。事实证明，不需要拆左侧挡板，这一步我是蒙对了。?主板芯片也看到了，这一步尤其要小心，这是最难得一步了，上下全是卡扣，一定要上下同时兼顾才行。这就是拆下来的挡板。?第五步，拆掉操作面板，先拧掉上面的4个螺丝。注意有个排线，要先拔掉。?第六步，拆掉扫描仪。主要有2个转轴，尤其是右侧那个，要先拔下排线才可以，记好排线的位置，回头别插错了。?第七步，马上就要大功告成了。拆掉机器上面的塑料挡板就行了。先来一张。?拆掉后的样子。??终于见到庐山真面目了，这就是传说中的进纸感应器啊！经过皮吹子处理，还真是有个小纸屑，原来一直都是你这个小东西在捣鬼啊！好的，大功告成，顺便再做做机器的清洁工作。哦，对了，还有最后一步，机器还要再装回去哦！?days of Drudge, illness increased, he Chong soon Fatt said: it seems that Im not dead to Japan soldiers tortured to death, and it certainly can not go home alive, even with small Japan fight and get it over, if you have the opportunity to get away. When shipping via Shun Tang Qiao, when river water needs, siazhen hard to pull the boat oars, and urgent steps on the ships rail, a small wooden boat overturned on the spot, the ship upside down, ship arms into the river bottom, brought the ship 2 Japan failed to come out of the water, and siazhen were also sacrificed. 1 Zhang Shun in the little boat, panic, jumping on the River Bank and escaped. (11) Chen Jinhai, Wu Ada fishing-Japanese soldier remains one day in April 1939, active in Wuzhen, anti-Japanese forces of Zhu Xi Xin Cheng, Yan Tomb, Tao Yuan min Yi Shen Zhuang Yang side of the village, this encounter with a group of Japanese soldiers, engaged in a fierce gun battle. 3 soldiers heroically battle Zhu Xi forces, remains fell into the Shen Zhuang Yang. Zhu Xi troops in pursuit of the Japanese, and no time to salvage the soldiers remains. Chen Jinhai, Wu Ada 2 people unt