梳个可爱猫耳朵型一点都不难.docVIP

梳个可爱猫耳朵发型一点都不难 可爱的猫耳朵发型很多女生都非常喜欢，也经常看见日系杂志上模特以这种造型出现。你是不是觉得这种发型一定就非常复杂呢?其实猫耳朵发型打造起来一点也不难。跟着小编学习你也能轻松做到。 STEP1：将头发分成左右两区，先从右侧头发开始，在刘海后方抓起一束头发，用橡皮筋固定在头发的中间。 STEP2：将固定好的头发从中间掏出一个洞，然后将马尾从洞中穿过去。 STEP3：用手拉出发梢。 STEP4：将发梢分成两等分，用力的拉扯发梢。 STEP5：在拉发梢的过程中，前方的头发会出现蓬松的弧度，用手指整理头发的弧度，再微微向外拉松。 STEP6：另外一侧以同样的方法打造。 不需要任何工作，只需要两根皮筋就能完成的猫耳朵发型。 可爱的猫耳朵发型你学会了吗？ 官方网站： [键入文字] and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening