SolidWoks创建增加视图方向.docVIP

SolidWorks增加视图方向，在工程图里面需要用的情况比较多，有的时候一个零件或者是装配体，用等轴视图不能完全满足我们的需要，这时候，我们需要等多是视图方向来表达我们的设计意图。 1.点击视图定向图标（像望远镜那玩意） 跳出视图方向编辑框，并且旋转零件到你需要的一个方向，如下图： 2.选择“新视图” 3.输入你新视图的一个名词 这里我就命名“新1” 4.新的视图命名好了，我们在点击中间那个“更新标准视图” 这时，我们点击视图栏，就会发现多了一个新的视图“新1”，这个视图就是我们刚才所创建的视图，可以用在工程图上面 我们创建工程图的时候，点击一下我们想要改变视图方向的图框，就会出现一个编辑栏，在里面“方向”这一个分类里面，我们可以看到有一个视图名词是我们新建的 5.勾择我们需要的视图，工程图的视图也会随之改变，如下图。 欢迎加群互相学习，这群里不能保证能解决你所有的问题，但是如果有我们会的，我们愿意热心为你解答，这是没有盈利性质的，靠的是大家的互相学习，共同进步！群号：座机电话号码1 PS：加群后请按照要求改好自己的群备注 enforced thermal insulation starts checking system, issued by the thermal insulation construction before you start to notice, transfer inspection of upper and lower operation and transfer of records. For outdoor operation, pipeline equipment to effectively carry out the insulation waterproof measures fail to install protective panels in part with three tarpaulin cover, to prevent insulation from moisture. Insulation seam Michael Jackson 5mm, joints, joints 100mm, insulation thickness tolerance +10MM~ – 5mm , appropriate material elastic banding, spacing according to the design requirements, rigid insulation soft materials for construction joints tight; And large-diameter vertical pipe for high temperature pipeline in strict accordance with design drawings called for the establishment of expansion joints and holding bracket; Design requirements into a removable type of insulation, in strict accordance with specifications disconnect from the other insulation; Surface insulation boards in the technology of plastering construction of woven cloth to prevent pollution and protective panels flush with the surface interface, tight and clean. Site measurement of insulation boards for elbow shape cutting, ensure that each piece of lapped traffic, arc transition of natural, beautiful, screws up. Stampede outside construction personnel is strictly prohibited and shelve objects directly on the outer shield. In order to prevent the pollution-prone heater, channel area of secondary pollution of large-diameter pipes an