科怡档案管理系安装使用简要说明.doc

1、运行“AUTORUN.EXE”，选择“标准版安装”进行安装 安装序列号 A0287-CL8ZE-S2TW3-TW3KX 安装结束时，可能会出现OCX文件注册出错，这和原文模块有关，如果不扫描原文可不用理会，否则，请安装OCXs Only目录中的程序。 安装OCX时会有安装失败的提示，不用管它，点确定继续安装。 安装完成点击桌面世纪科怡档案管理系统（标准版）的图标进入。默认用户名：ISA默认密码：ISA 如需扫描原文，进入系统后可对原文路径进行设定，在系统维护—全宗管理里。 如果文书档案以件为单位归档，且按年度—机构—保管期限分类，需进行机构设定，在系统维护—辅助字典里。 档案号格式的设定，在系统维护—档号格式里 归档文件目录输入举例（下图），注意：归档年度应填写文件形成年度 输入按卷整理时，应该先输入案卷目录 按卷整理输入时，页号是根据页数计算的 上图第一件是10页，存加后，下图第二件的页号自动变为11 查询时，关键字是半角百分号分隔 报表需要调整时，在主页面， 鼠标指向档案管理，按下CTRL+1可进入报表设计页面 在主页面，鼠标指向系统维护，按下CTRL+1可进入数据表结构设置，可根据需要增加字段 做结构及报表修改时，请注意先备份 “软件安装目录\SINFARCH”目录下的“iS_ARCHIVE.db”文件，以防万一。所有数据和报表都保存在“iS_ARCHIVE.db”里，请及时备份。 coupling Centre shall be checked, the second poured concrete strength of more than 70%. In the process of reaming or boring, apart from the special provisions in factory, does not allow any work that may affect the coupling Centre, such as irrigation, to cylinder connections to flood the condenser pipes and so on. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Mounting bolts should be added lubricants, typing gently with a small hammer, not too loose or too tight, packed the bolts with the corresponding seal screw hole should be marked. 6.4.5.4.2 coupling reamed and pairings is close to the diameter of bolt bearing good hinge holes, dressed with a good two coupling bolts before you can move the rotor, boring-reaming hole in turn. Coupling bolts must be tight coupling is symmetrical diameter, in boring, reaming, two bolts out. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Due to the coupling bolts in accordance with hinge holes corresponding to the diameter of the screw holes one by one after processing, processing back bolt installation location cannot be changed, so according to bolt after the actual weight difference of nut and lock washer to match. General requirements for coupling two symmetrical diameter bolt, nut and lock washers total weight difference should not be greater tha