光学显微镜的操细菌、放线菌、蓝细菌个体形态的观察.doc

《环境工程微生物学》 实 验 报 告 实验名称：光学显微镜的操作及细菌的观察 专 业： 环境科学 班 级： 环科111 学 号： 1108100056 学生姓名： 李 喆 指导教师：_____ 钱晓莉__ 实验日期:_______ 2013.4.8__ 一、实验名称 光学显微镜的操作及细菌、放线菌和蓝细菌个体形态的观察。 二、实验目的 1、了解普通光学显微镜的构造和原理，掌握显微镜的操作和保养方法。 2、观察、识别几种细菌、放线菌和蓝细菌的个体形态，学会生物图的绘制。 学习用压滴法制作标本片。 （1）显微镜、擦镜纸、香柏油或液体石蜡、二甲苯、 （2）示范片：细菌三形、弧状、丝状、细菌鞭毛及细菌荚膜。放线菌、颤蓝细菌、微囊蓝细菌或念珠蓝细菌等。 霉菌 放线菌 周鞭毛 细菌荚膜 酵母菌 其他细菌 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables