锅炉内胆温度前—反馈控制.docVIP

摘 要 随着现代工业生产的迅速发展，对工艺操作条件的要求更加严格，对安全运行及对控制质量的要求也更高。而单回路控制系统往往不能满足生产工艺的要求，在这样的情况下，串级控制系统就应运而十。介绍了锅炉温度串级控制系统的结构与控制特点，描述了应用MCGS组态软件、可编程控制器及485工控网络对锅炉夹套和锅炉内胆温度的串级控制。给出了部分PLC程序，介绍了组态软件功能窗日的设置。论述了模拟锅炉内胆水温与循环水流量构成的串级控制系统的研究过程本次设计以刑过程综合自动化控制系统实验台及其实验装置为平台，采用A 18081智能仪表对温度一流量串级控制系统进行控制，井通过M CGS组态软件进行上位机监扑，说明了主副调节器参数改变对系统性能的影响跃扰动作用几副对象和主对象时对系统的影响 关键词：锅炉；内胆温度；前馈反馈控制； Abstract With the rapid development of modern industrial production, the requirements on the operating conditions more stringent controls on the safe operation and the quality also higher. The single-loop control systems are often unable to meet the process requirements, in this case, the cascade control system will be shipped and 10. Describes the boiler temperature cascade control system structure and control characteristics, and describe the application of MCGS configuration software, programmable controllers and industrial networks boiler 485 and boiler jacket liner temperature cascade control. Given part of the PLC program, configuration software features introduced on the settings window. Discusses the simulation of the boiler water temperature and the circulating water flow liner composition cascade control system design process in this criminal Integrated Automation Control System for Taiwan and its experimental device for the platform, A 18081 smart meter a flow of temperature series level control system to control, well conducted by M CGS PC configuration software monitoring flutter, shows main and regulator parameters to change the impact on system performance jump disturbance of several deputy objects and the main object of the system Keywords: boiler; liner temperature; feedforward and feedback control;  目 录 摘 要 - 1 - Abstract - 2 - 目 录 - 4 - 第1章绪 论 - 6 - 1.1选题背景 - 6 - 1.2国内外研究现状 - 6 - 第二章 前馈与反馈概述 - 9 - 2.1前馈控制 - 9 - 2.1.1前馈控制简介 - 9 - 2.1.2实施 - 11 - 2.1.3风险 - 11 - 2.2反馈控制 - 13 - 2.3不变性原理与前馈控制 - 14 - 2.4前馈一反馈理论 - 16 - 第三章 系统硬件设计 - 18 - 3.1锅炉温度串级控制系统的生产工艺要求 - 18 - 3.2串级控制系