(智能装配)关生成proe电路板结构图步骤.doc

上次发布了关于“PRO/E设计与电子线路设计的仿真结合运用”，很多朋友提出来要把教程简述一下，这里我整理了一下，供大家参考，先放上一张效果给大家看看！ 关于生成proe电路板结构图步骤分以下图示步骤完成：|1一般电路板设计利用protel等会生成emn和emp文件2打开proe 先导入emn文件 注意一定要勾选组件和包含导入的对话框3 然后进行更改，比如板子厚度等等，特别注意其中的一些选项 4产生草绘界面，有时软件之间的不兼容，都可以导致该图形不封闭，于是需要自己在草绘中修改直至可以封闭为好！5这是自动生成的电路板的光板文件已经生成了，好像系统默认颜色不对，呵呵！ 6 这时会弹出对话框需要查找emp对应文件，自己找到刚才的位置。 7在生成中速度好慢啊！共有一千多个元器件！等待！！！  8 好了，基本已经生成，但是颜色不对，好像板子大了很多！我们可以对此进行下修改，打开板子的零件，进行切割，在导入文件时，外框线已经有了，不需要我们自己画，只要找边界就好了！对了，顺便把颜色也改改！? 更改一下，就好了！呵呵 草绘平面进行编辑  好了，再退回到总装图看看吧！已经很清晰了！ 看个局部的照吧！呵呵 再装上纯铜散热器，大功告成！看看吧 希望大家能够一起讨论讨论，这只是外形结构的仿真设计，对于我们这些搞结构的，很多时候并不知道电子元器件的大小高低，只能凭借经验来判断，如果能够利用这种方法，就可以搭建结构设计与电子设计的桥梁，图纸是工程师的语言，这个方法希望能够充当翻译两个领域的工具！这个方法我已经运用5-6年了，很多时候会出现失败或者别的情况，后续还会跟大家一起介绍分析过程和许多时候失败的原因，以及“逆向”方面的介绍！！ trees 610 tree, and flower more than 6,000 more strains, built high standards even building greenhouse 152 square meters, hardening courtyard 1800 square meters, opened has hospital within circular Lane, makes organ environment further get has green, and landscaping and bright of. 　　Office building tension, disperse, managing difficult issues our departments Office space had been realigned, the maximum to meet the needs of departmental Office. 　　Six, foreign bodies, under the management of the business unit achieved a new breakthrough this year, overseas offices and business units based on their practice to the full, proactive and bold innovations, dare to break through and work have made gratifying achievements. One is to play to their own advantages, in terms of coordinating service onto a new stage. Units always put quality in an important position, pay attention to the function of the service, set up the good image, expanding influence. Liaison Office in Beijing and offices in blue, is located in the capital and the capital city of advantages, actively building the city opening, economic relations, investment platform, take the initiative to strengthen ties with Beijing, Orchid staff of, in particular, report