‖PS教程‖：你如何做闪光形像照.doc

1:首先点击最上边的文件2个字,点击打开,选中你要做的图片.我先拿张照片做一个吧.你们要仔细看哦!2:打开以后点击图层,然后点复制图层,要点2次哦.就是复制图层2次.↓3:然后点击左下角的小3角↓4;进入以后点击从图层建立桢↓之后就会出现 (如图所示)↓然后点击下1帖↓5:点击最上边菜单栏中的滤镜.然后在选中渲染，最后点镜头光晕之后就会出现(如图所示)↓↑选中电影镜头，（依个人喜好，你也可以选其他效果）最后确定，第一侦就做好了６：接下来的第２侦和第１侦的做法一样．↓注意做第２侦的时候点一下这里(如图所示)↓做第３侦也是一样的．↑注意；↓最后我们把做好的图片保存．最后效果：有的朋友问我为什么做了５１头像就不闪了．答：你最后保存的时候，最上边的菜单栏中有个图象．进入以后把大小调节成比例为１２０．１２０然后在上传到５１里，在把他设置为头像就闪了 the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than two points. Repeated measurements determine the location points must ensure that the positioning is correct. (5) take level (level): level (minor works available in horizontal pipe), the two anchor points determine the horiz