KSB-汽动给水泵技术特点解析.pptVIP

Barrel-type pump CHTD * Barrel-type pump CHTD 汽动给水泵的特别说明： 1，采用德国KSB整泵原装进口或芯包进口方案。 2，筒体（进口）材料采用德国1.7383相当于12Cr2Mo1的不锈钢材料，材料配置远高于其它竞争对手的配置。 3，提供1台给水泵在德国KSB工厂见证性能试验。 * Barrel-type pump CHTD Design Features Barrel-type Pump CHTD 结构特点筒式泵 CHTD 1. Suction stage impeller 首级叶轮 2.Cellular surface wear rings 蜂窝状泵体密封环 3. Balancing device 平衡装置 4. Shaft sealing system 密封系统 5. Static sealing systems 唇形密封 * Barrel-type pump CHTD 1. 1st suction stage impeller首级叶轮 Optimised Suction Stage Impeller 优化的首级叶轮 More than 50,000 hours of operation without cavitation-induced wear 优异的抗汽蚀性能，运行周期可达到50,000 ~ 100,000 小时 Maximum operating periods of the suction stage impeller首级叶轮最长的运行周期 Special vane profile for zero cavitation 特制的叶型可消除汽蚀 * Barrel-type pump CHTD Cellular Surface Wear Rings 有蜂窝状表面的耐磨环 Optimized cell geometry of wear rings for: 经过优化的蜂窝形状可以使耐磨环具有下列特性: Lowest internal leakage losses 由于内部泄漏造成的损失最小 Best anti-seizure properties 防咬合性能最佳 Increased rotor stability 转子稳定性增强 Lower sensitiveness to dirt particles 对杂质颗粒的敏感性低 Long service life 使用寿命长 Lower operating costs as a result of higher efficiency 效率高、操作成本低 Higher level of operational reliabilityand availability 操作可靠性和可用性高 Your benefits 你的受益 2. Type of Wear Ring泵体密封环类型 * Barrel-type pump CHTD  Double safety and reliability:When the thrust bearing fails, the double drum acts like a disc 双平衡鼓的安全可靠性: 当推力轴承损坏，双平衡鼓起到了平衡盘的作用 Lower loads on thrust bearing if the clearances increase Copes well with transient conditions (variable pressure operation) 当出现一些大负荷工况，通过轴向间隙的调节，使推力轴承不会承受大的轴向推力 Material characteristic 平衡鼓材质同轴材质为17-4PH，平衡座套材质为RWA350防咬合材料 Long service life thanks to improved rotor damping (large drum diameter) 长的运行寿命，高稳定性 Higher efficiency thanks to lower quantity of balancing liquid 高效率源于较小的平衡水量 KSB Solution KSB 双平衡鼓的技术优势 3. Balancing Systems双平衡鼓技术优势 * Barrel-type pump CHTD 4. Sealing systems 密封系统－浮动环密封 Highest reliability due to non-contact sealing elements 由于密封部件不接触，最长的使用寿命 Suitable for the highest system pre