车辆工程汽车离合器的外文文献翻译--学位论文.docVIP

湖 北 文 理 学 院 毕业设计论文 题 目 有限元热分析的陶瓷离合器 专 业 车辆工程 班 级 Xxx 姓 名 Xxxx 学 号 2010138xx 指导教师 职 称 Xxx 副教授 2014年2月25日 Fethermal analysis of a ceramic clutch 1. Introduction Abrasive dry running vehicle clutches are force closure couplings. Torque and speed transmission are ensured by the frictional force generated between two pressed surfaces. Reasons for the application of ceramic as a friction medium include good heat and wear resistance properties, which provide the opportunity to drive higher pressures, and a low density. Thus, an increasing power density is enabled