45UV火检.pptVIP

45UV 火检 45UV5 Flame Scanner 45UV5 Flame ScannerFeatures Vacuum tube ultraviolet sensor Adjustable gain (UV tube orientation) 120 VAC supplied from compatible Fireye power supply Electro-mechanical self-checking Optional threaded electrical connector (P/N 60-2366) Hinged mounting flange 45UV5 Flame ScannerApplications Gas, light oil Precautions / UV Blockers Water vapor (FGR) Atomizing steam Unburned fuel Some process gases (H2S, NH3) 45UV5 Flame ScannerReducing Sensitivity/UV Tube Orientation Ultraviolet Flame Detection Vacuum Tube Method Two tungsten or molybdenum electrodes in a gas-backfilled quartz vacuum tube 850 to 950 volts AC applied from step-up transformer in the scanner Ultraviolet Flame Detection Vacuum Tube Method (continued) UV radiation passes through the quartz and strikes the electrodes A small current flows between electrodes, ionizing the gas, resulting in characteristic blue “glow” The current flow (or avalanche) will be in small bursts at a rate from 0 to 2,000 pulses per second Ultraviolet Flame DetectionVacuum Tube Failure Modes Mode 1 The tube ceases to fire, or fires intermittently Caused by age and a loss of gas backfill Results in no operation, or nuisance shutdowns Ultraviolet Flame Detection Vacuum Tube Failure Modes Mode 2 The tube continues to generate pulses after the ultraviolet source is removed Caused by age and a loss of gas backfill Results in constant Flame-ON indication Electro-mechanical SELF-CHECKING is employed to ensure safe operation Ultraviolet Flame DetectionVacuum-Tube Self-Checking Electro-mechanical shutter periodically blocks the light striking the UV tube The flame amplifier expects the output to go to zero when the shutter closes If it does not the amplifier will de-energize the flame relay shutting down the burner and/or alarm the failure Ultraviolet Flame DetectionWiring Diagram 45UV5 Scanner Accessoryp/n 60-2366 Connector Kit(cable not included) 45UV5 Scanner Accessoryp/n 60-2366 Connector Kit(insta