青岛道声 煜丰 翼神音响改装—后备箱倒模 改装案例解析.docVIP

“战车翼神”浑身上下散发出诱人的气息，这辆漂亮的白色翼神车主就对原车音响非常不满意，一直想着升级音响，但是在一直找不到心仪的专业汽车音响改装店，于是在各大音响论坛上“潜水”多日后，经过多次查阅，交流终于决定来对自己的爱车进行音响改装。话不多说，让我们和大家来共同见证一下…………….. 话不多说，开始准备本次升级所需要的配置 拆掉门前内饰板，门板铁皮裸露无疑，那么对门板的噪音控制可想而知。对门板采用双层隔音，使车门形成一个密封箱体，产生共振，让您在劳累一天中可以享受到美妙的音乐，完美驾驶环境， 对尾箱进行隔音，可以减少?及由轮胎传入的路面噪音，和排气声导入后箱的共鸣音压。 整理电源线 倒模开始前先要量度好位置确认能安装上喇叭，如果是低音的喇叭单元还得确认箱体的容积要足够才可，经过一番修补后，音响模型已经形成……………….. 改装完成，车主坐在爱车里听着美妙的音乐，并表示对本次改装非常满意。 equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power