ERP-BOM成操作手册.docVIP

一、商品BOM的生成： 方法1： 路径：SAP菜单→后勤→生产→主数据→商品清单→商品清单→商品BOM→CS01—创建 详细步骤： 步骤1：选择CS01，进入屏幕1——初始屏幕 屏幕1 输入后回车进入步骤2 步骤2：为BOM添加数据，在屏幕二当中按提示操作，首先在“组件”栏目内输入一个子件的物料号，回车，系统提示选择ICT类别，选择“非库存物料”，输入“数量”、“Un”——单位，添加成功 ，然后回车继续添加其他子件。 屏幕2 通用项目总览项 方法2：在导航栏输入事物代码CS01 步骤：无 事物代码：CS01 二、商品BOM的更改 方法一： 路径：SAP菜单→后勤→生产→主数据→商品清单→商品清单→商品BOM→CS02—更改 步骤： 1，选择CS02，双击进入屏幕3 屏幕3 输入后回车进入屏幕4 2，更改或添加子件 方法2：在导航栏输入事物代码CS02 步骤：无 事物代码：CS02 of prepared, and group volume, and review, and binding and transfer work 8.11 timely do appraisals summary work, strict reward measures. 8.12 safety health and environmental management based on safety and prevention first, the national security policy, national security law as the criterion, ... Appendix a, company quality management system program of prepared, and group volume, and review, and binding and transfer work 8.11 timely do appraisals summary work, strict reward measures. 8.12 safety health and environmental management based on safety and prevention first, the national security policy, national security law as the criterion, ... Appendix a, company quality management system program of prepared, and group volume, and review, and binding and transfer work 8.11 timely do appraisals summary work, strict reward measures. 8.12 safety health and environmental management based on safety and prevention first, the national security policy, national security law as the criterion, ... Appendix a, company quality management system program 选择用途，必填 输入物料号，必填项 选择用途 输入物料号 在此增加子件 选择要更改的项目