CN_Bet_Conveyors_with lifting_roll_R.docVIP

List of additional documentation Description of functions and components Schematic diagram(s) / Mimic systems diagram(s) Signal and actuating list Functional diagrams copy to: I n d e x date without 01.12.08 a 30.07.09 Shougang 1 1 SMS-EA 1 1 ALK 1 1 Table of contents Sheet 1. List of additional documents 3 2. Description of functions and components 3 General 3 3. Kinematic sketch(es) / Mimic system diagram(s) 3 4. Signalling and actuating list 3 Belt conveyors – Drive 3 Lifting roll – Adjustment 3 Electromagnets – Belt conveyor no. 1 3 Electromagnets – Belt conveyor no. 2 3 General commands 3 5. Functional diagrams 3 Changes (refer to the actuated motor - and component list) List of additional documents Instructions for using of Functional Descriptions: Manual Chapter A00 Motors and Components List List of Operator Control Stations Hydraulic- and Pneumatic Diagrams Description of functions and components Function Transferring the strip to the shear 将带钢传送到横切剪上。 Arrangement In the upper strip level between flattener no. 1 and entry shear.在一号横切剪上部辊和横切剪之间。 Characteristics 2 belt conveyors with endless belts with electro magnets.两条循环带和一些电磁铁。 Main technical data Total distance to be bridged (approx.) 2 x 4 000 mm Conveyor belt width approx: 2 x 500 mm Lifting roll: ( 150 x 1 600 mm Drive(s) Drives: 2 variable speed gear motor (one for each conveyor),  controlled by frequency converter (only for threading). Lifting roll – Adjustment: 2 pneumatic cylinders,  controlled by one double solenoid valve. Magnets: Electrically provided Definitions Forward: Downstream Backward: Upstream Apply: At strip Retract: Away from strip General The belt conveyors with lifting roll are arranged in the upper strip level between flattener no. 1 and the cross cut shear transferring and advancing the strip during threading. The conveyor belts