安刻牌玻璃刻绘机手持键盘(手柄)英文使用说明.docVIP

Manual of Artcut Software Keyboard Operations Keys on the Keyboard and Their Functions 1. Process: With this key pressed, you can start processing after the origin is set under the Coordinate state. 2. Pause/Continue: With this key pushed down during your processing, the machine will stop operating. Click on this key again, the machine will work again. 3. Upper Right (X\Y): it makes X and Y axes move towards your upper right direction along an oblique line simultaneously. 4. Forwards (Y): it makes the Y axis move forwards. 5. Upper Left (X\Y): it makes X and Y axes move towards your upper left direction along an oblique line. Right (X): with the key pushed down, the X axis moves to the right. 7. Reset (XY): it will reset the X and Y coordinates. This key can be used for the adjustment of parameter values. 8. Left (X): it makes the X axis move to the left. 9. Lower Right (X\Y): with this key pressed, the X and Y axes will move towards the lower right side along an oblique line. 10. Backwards (X): this key moves the Y axis backwards. 11. Lower Left (X\Y): it moves X and Y axes to the lower left along an oblique line. 12. Changeover: it changes over the coordinates among RX, AX and OX. 13. Main Spindle: it is used to set the spindle switch, driving the spindle to rotate or stop operation. 14. Move Set: it is used to set all move modes and parameters. 15. Region: it is arranged for the setting of processing region. 16. Tool Adjustment: with this key pressed, several options for the tool will be displayed on the screen where you can choose and adjust the tool position. 17. Home: it makes all coordinates return to the absolute origin. 18. OK: with this key clicked on, you can confirm and save all modification. 19. Cancel: it is used to cancel all modification. 20. Up (Z): it makes the Z axis move up. 21. Menu: it is a main menu from which you can find all required Setting items. 22. Reset (Z): with this key pushed down, all Z coordinates will be reset. 23. Repeat