ABB传动调试软件DriveWindow介绍.ppt

DriveWindow 2. ? ABB Oy FINLAND- * - DriveWindow 2 DriveWareABB Oy University - * - version: 06.2004 DriveWare ? Introduction DriveWindow is Windows Application for commissioning and maintaining ACS600, ACS800, ACS6000, ACS1000 and DCS600. Operating system Windows NT, Windows 2000, or Windows XP Functions ·Control operations start, stop, references, etc. ·Monitoring signals in numerical and graphical format ·Parameters changing values ·Datalogger controls, display ·Fault Logger display faults, controls ·Back-up Restore complete software back-up ·All functions over network control, monitoring, etc. Required DriveWindow hardware: ·ISA card, or ·PCMCIA-card PCMCIA-slot or PCI-slot with PCI/PCMCIA adapter ·Network adapter when using remote connection ·DDCS cabling Connection ... 8760 NDBU-95/85 NISA-03 ISA DDCS-protocol 1 Mbit/s OR  GOF max 1000m NOCR-01 is required HCSmax 200 m OR POFmax 30m ... GOF Glass Optic Fibre HCS Hard Clad Silica Fibre POF Plastic Optical Fibre Connection alternatives: 1. Direct connection point-to point between the PC and the drive the most common manner 2. Through the distributor, DriveWindow-link sectional drives. An individual address to be set by parameter 70.02 or 70.15 for every drive in the link. 3. Ring. Drives can be connected in a ring .An individual address to be set by parameter 70.02 or 70.15 for every drive in the link. Note! all the drives in the ring should have power supply on all the time. Otherwise the ring will break. Note ! Do not use address one 1 if several drives are in a network ring or connected together with the distributors. The first 1. address are meant for sparepart use. 2. CH 3 CH 3 CH 3 Optical distributor 9 channels CH 3 NDPA-02 PCMCIA + NDPC-02 5Mb orNDPC-12 10Mb MSTR 8760 NDBU-95/85 MSTR CH 3 1. 3. CH 3 PCMCIA-adapter PCI + NDPA-02 PCMCIA + NDPC-02 5Mb or NDPC-12 10Mb OR HCSmax 200 m OR POFmax 30m OR Double-click the program icon Getting start 1. Select OK Most of the operation