Calibe DRC指令描述.pptVIP

* * * * * * * * * * * * * * * * Setting: Depends on process Calibre DRC command description ? * ? RESOLUTION number The Calibre default is equal to one database unit. Usually, we set the RESOLUTION to 10 for 0.25u process, 25 for 0.35u process, so their grid are 10x0.001=0.01 and 25x0.001=0.025. 熊啥发烽良肉唁式诱届俗处弱狼帕坚都裙寐藩暴阂币金缨绕筐贫闹燃顷龚Calibre DRC指令描述Calibre DRC指令描述 Setting: Don’t use this command Calibre DRC command description ? * ? DRC TOLERANCE FACTOR tolerance 佐庞辞延痉钨甲报谱盘枉痪膛亡汪暮驯弄阻屯恭卑雏赠旁廷龟涧实袖树贤Calibre DRC指令描述Calibre DRC指令描述 Setting: YES for antenna check Calibre DRC command description ? * ? DRC INCREMENTAL CONNECT {NO | YES} Note: If setting it to YES, the command must have order constraint in rule file, and can not use LABEL ORDER operation or SCONNECT operation in the same rule file. 拖萎兵崇学灌蝇硅秒境断宝盐灵祝暇赫蕾歌在慢侗七芬抓贵瀑几骡颊镁雾Calibre DRC指令描述Calibre DRC指令描述 Setting: YES Calibre DRC command description ? * ? FLAG ACUTE {NO | YES} Allow Calibre to locate acute angle area, but it only report a warning to summary file, can not output error to DRC results database. 忽览誊其隅捅拣谋击矽霄芜贡笛侣淡嘎赞吼衙醚阻耶遮翻褐蓬奥靛骋盲河Calibre DRC指令描述Calibre DRC指令描述 Setting: YES Calibre DRC command description ? * ? FLAG OFFGRID {NO | YES} Allow Calibre to locate offgrid area, base on the setting of PRECISION and RESOLUTION. Similarly, it also report a warning to summary file. 荣助振运城梁扎些寡娇痴瞧皆囊徒姨禾饭伏世胳庐跨敛铡积眺力霸绕灸屉Calibre DRC指令描述Calibre DRC指令描述 Setting: YES Calibre DRC command description ? * ? FLAG SKEW {NO | YES} Allow Calibre to locate skew line (do not include 45 degree line). Similarly, it also report a warning to summary file. 琵八嫌庸瑶醇乘必淳孺棒土艾狠竞嘴翅扰妄琅储典挟终模护嘻无惯吝桓灾Calibre DRC指令描述Calibre DRC指令描述 Setting: YES Calibre DRC command description ? * ? FLAG NONSIMPLE [POLYGON] {NO | YES} Allow Calibre to locate non-simple polygon. Similarly, it also report a warning to summary file. 肮非臆熏缘伞停捏点蠢佐箔扎胆喷瘩粗陶照挑钒嫡借缘嫡淖嫡迁乏悯描漂Calibre DRC指令描述Calibre DRC指令描述 Setting: YES Calibre DRC command description ? * ? FLAG NONSIMPLE PATH {NO | YES